Block paving driveways in Caernarfon: the local picture
Around Caernarfon, plots are often larger and drives longer, so edging, falls and the route the water takes need planning.
Hilly streets in much of Wales mean many drives slope, which shapes the falls, the edging and the water route.
How much does a block paved driveway cost in Caernarfon?
Most block paved driveway quotes in Wales fall within £80–£130 per m² including VAT. A 50 m² double drive would usually be about £3,950–£6,500, with any extras listed separately on your quote.
| Item | Guide price inc VAT |
|---|---|
| Concrete block driveway, new sub-base | £80–£130 per m² |
| Breaking out an old surface | £9.50–£35 per m² |
| Edging or kerb, bedded and haunched | £19–£45 per metre |
| Typical channel drain run | £330–£930 |
| Dropped kerb (vehicle crossover) construction | £930–£2,800 |
Guide figures for Wales, checked 9 November 2026. See all prices or use the guide price tool.
What does a block paved driveway involve?
We build block drives for homeowners from scratch: digging out the old surface, setting edge restraints in concrete, building and compacting the sub-base, screeding the laying course, laying the pattern, cutting in the edges and vibrating the blocks into the sand. Every quote states the depth of dig, the sub-base thickness, the edging, the falls and where the water goes.
- Survey, measurements and a written, itemised quote
- Cuts at edges, around covers and against the house
- Blocks laid in your chosen pattern, with a contrasting border if wanted
- Kiln-dried sand brushed in and the surface vibrated with a plate compactor
- Sharp-sand laying course screeded to falls
Before we price your block paved driveway
- Access for a mini-digger, skip or grab lorry
- Existing manhole and inspection covers, and whether to recess them
- Steps, thresholds and door heights
- Levels against the damp-proof course (the finished paving must sit at least 150 mm below it)
- Where rain will go: falls, lawn, border, channel or soakaway
Rules for front drives in Caernarfon
Caernarfon is in Wales, so these rules apply:
In Wales, any new or replacement hard surface at the front of a house should be permeable or drain to a permeable area within the property to avoid needing planning permission. Unlike England, there is no 5 m² allowance for new paving; only repairs of up to 5 m² of existing surface are exempt.
Since January 2019, construction work covering 100 m² or more with drainage implications, including drives and patios, needs approval from the local SuDS Approving Body (SAB) before work starts, even where planning permission is not needed.
A dropped kerb needs your council's approval as highway authority, and a new access onto a classified road needs planning permission.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
From enquiry to finished paving
Send the basics
Postcode, what you need and a rough size. Photos help.
Survey
We measure, check levels, ground and drainage, and talk through blocks and patterns.
Written quote
An itemised quote with the specification, the price and the start date.
The work
Our paving team builds it to the agreed specification and leaves the site swept.
What you can expect from us
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
Block paved driveways in Caernarfon: questions
Is the survey in Caernarfon free?
Yes, for new paving here: the survey and written quote are free with no obligation. Repairs and cleaning are usually priced from photos, or from a short visit where needed.
Can you match the blocks to my house in Caernarfon?
We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.
How much does a block paved driveway cost in Caernarfon?
Our guide for Caernarfon is £80–£130 per m² including VAT, so a 50 m² double drive is usually about £3,950–£6,500. Your fixed price follows the survey.
How long does a block paved driveway take to build?
Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.
Block paved driveways near Caernarfon
Nearby towns we cover for block paved driveways, and block paved driveways across Gwynedd:

