What to know before a block paved driveway in Caldicot
Caldicot is a smaller town, and many of its homes have more frontage to work with than city houses, which leaves room for borders and planting.
Hilly streets in much of Wales mean many drives slope, which shapes the falls, the edging and the water route.
How much does a block paved driveway cost in Caldicot?
Most block paved driveway quotes in Wales fall within £80–£130 per m² including VAT. A 50 m² double drive would usually be about £3,950–£6,500, with any extras listed separately on your quote.
| Item | Guide price inc VAT |
|---|---|
| Concrete block driveway, new sub-base | £80–£130 per m² |
| Breaking out an old surface | £9.50–£35 per m² |
| Edging or kerb, bedded and haunched | £19–£45 per metre |
| Typical channel drain run | £330–£930 |
| Dropped kerb (vehicle crossover) construction | £930–£2,800 |
Guide figures for Wales, checked 9 November 2026. See all prices or use the guide price tool.
What does a block paved driveway involve?
A block paved driveway is a surface of small concrete or clay blocks laid tightly on a bed of sharp sand, held in by a fixed edge and locked together with kiln-dried jointing sand. Laid on a properly dug and compacted sub-base, it carries cars for decades, and a single damaged block can be lifted and replaced without breaking the surface.
- Blocks laid in your chosen pattern, with a contrasting border if wanted
- Survey, measurements and a written, itemised quote
- Sharp-sand laying course screeded to falls
- Edge restraints or kerbs bedded and haunched in concrete
- Removal of the old surface and soil to the agreed depth, with waste taken away
What we check on a Caldicot survey
- Edges against lawns, beds, walls and neighbours
- Ground conditions under the old surface and how deep the sub-base must be
- Trees and roots near the drive
- Where rain will go: falls, lawn, border, channel or soakaway
- Where an electric vehicle charger cable might run
Rules for front drives in Caldicot
Caldicot is in Wales, so these rules apply:
In Wales, any new or replacement hard surface at the front of a house should be permeable or drain to a permeable area within the property to avoid needing planning permission. Unlike England, there is no 5 m² allowance for new paving; only repairs of up to 5 m² of existing surface are exempt.
Since January 2019, construction work covering 100 m² or more with drainage implications, including drives and patios, needs approval from the local SuDS Approving Body (SAB) before work starts, even where planning permission is not needed.
A dropped kerb needs your council's approval as highway authority, and a new access onto a classified road needs planning permission.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
From enquiry to finished paving
Quick details
Your postcode and the job. It takes a minute.
On-site check
Measurements, levels against the damp-proof course, ground and drainage.
Itemised quote
Fixed once the specification is agreed, with no vague extras.
Laid and finished
Compacted, jointed and handed back clean.
What you can expect from us
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Block paved driveways in Caldicot: questions
Do I need planning permission for a block paved driveway in Caldicot?
In Wales, new front paving should be permeable or drain within your boundary to avoid planning permission, and drives of 100 m² or more need SuDS approval. Ask us on the survey if you are unsure.
Can you match the blocks to my house in Caldicot?
We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.
How long does a block paved driveway take to build?
Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.
What happens to my old drive?
It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.
Block paved driveways near Caldicot
Nearby towns we cover for block paved driveways, and block paved driveways across Gwent:
- Block paved driveways in Chepstow
- Block paved driveways in Newport, Gwent
- Block paved driveways in Cwmbran
- Block paved driveways in Pontypool
- Block paved driveways in Risca
- Block paved driveways in Monmouth
