East Sussex · Block paved driveways

Block paving driveways in Crowborough

Our block paving driveways service covers Crowborough and nearby Hailsham, from first measurements to the final sweep of kiln-dried sand. You get a written, itemised quote before anything is booked.

  • Postcodes TN6, TN7, TN20
  • £90–£150 per m² inc VAT
  • Free survey for new paving
Silver-grey herringbone block paved driveway with a charcoal border in front of a detached house

Block paving driveways in Crowborough: the local picture

In and around Crowborough, village-style frontages sit alongside newer cul-de-sacs, so the right block often depends on the age of the house.

Chalk, clay and sandy ground all occur across the South East, so the dig and sub-base depth are set on the survey rather than assumed.

How much does a block paved driveway cost in Crowborough?

Guide price in Crowborough£90–£150 per m²Including VAT at 20%

For Crowborough, our guide is £90–£150 per m² including VAT, so a 50 m² double drive is likely to be £4,600–£7,550. Smaller jobs cost more per square metre because set-up and waste costs do not shrink with the area.

ItemGuide price inc VAT
Concrete block driveway, new sub-base£90–£150 per m²
Breaking out an old surface£11–£45 per m²
Edging or kerb, bedded and haunched£20–£55 per metre
Typical channel drain run£380–£1,100
Dropped kerb (vehicle crossover) construction£1,100–£3,250

Guide figures for the South East, checked 9 November 2026. See all prices or use the guide price tool.

What you get with our block paved driveways service

A block paved driveway is a surface of small concrete or clay blocks laid tightly on a bed of sharp sand, held in by a fixed edge and locked together with kiln-dried jointing sand. Laid on a properly dug and compacted sub-base, it carries cars for decades, and a single damaged block can be lifted and replaced without breaking the surface.

  • Kiln-dried sand brushed in and the surface vibrated with a plate compactor
  • Edge restraints or kerbs bedded and haunched in concrete
  • Sharp-sand laying course screeded to falls
  • Crushed-stone sub-base laid in layers and compacted
  • Removal of the old surface and soil to the agreed depth, with waste taken away

What we check on a Crowborough survey

  • Levels against the damp-proof course (the finished paving must sit at least 150 mm below it)
  • Where an electric vehicle charger cable might run
  • The kerb: is it already dropped, and is it wide enough?
  • Access for a mini-digger, skip or grab lorry
  • Where rain will go: falls, lawn, border, channel or soakaway

Planning and kerb rules in Crowborough

Crowborough is in England, so these rules apply:

In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.

Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.

A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.

General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.

How it works

  1. Quick details

    Your postcode and the job. It takes a minute.

  2. On-site check

    Measurements, levels against the damp-proof course, ground and drainage.

  3. Itemised quote

    Fixed once the specification is agreed, with no vague extras.

  4. Laid and finished

    Compacted, jointed and handed back clean.

Why choose Block Paving Contractors

The dig and sub-base in writing

Your quote states the depth of dig, the sub-base thickness and how it is compacted.

Repair before replace

If your drive can be fixed or re-laid, we will say so.

Water planned first

Falls, channels and soakaways are designed before the pattern is chosen.

One point of contact

You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.

Block paved driveways in Crowborough: questions

How long does a block paved driveway take to build?

Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.

How much does a block paved driveway cost in Crowborough?

Our guide for Crowborough is £90–£150 per m² including VAT, so a 50 m² double drive is usually about £4,600–£7,550. Your fixed price follows the survey.

Is the survey in Crowborough free?

Yes, for new paving here: the survey and written quote are free with no obligation. Repairs and cleaning are usually priced from photos, or from a short visit where needed.

Can you match the blocks to my house in Crowborough?

We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.

Block paved driveways near Crowborough

Nearby towns we cover for block paved driveways, and block paved driveways across East Sussex:

Other block paving services in Crowborough

Or see all block paving services in Crowborough.

Next step

Get a guide price in two minutes

Tell us what you have in mind for Crowborough, and we will put a written price together.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote