Dundee and Angus · Block paved driveways

Block paving driveways in Dundee

If you are in Dundee (DD1, DD3, DD4, DD2) and want a block paved driveway, we will come out, measure up and give you a fixed written price once the specification is agreed.

  • Postcodes DD1, DD3, DD4
  • £85–£140 per m² inc VAT
  • Free survey for new paving
Silver-grey herringbone block paved driveway with a charcoal border in front of a detached house

What to know before a block paved driveway in Dundee

Dundee has everything from short terrace frontages to wide drives on newer estates, so the survey sets the layout and the dig.

Frost and heavy rain test paving in Scotland, so a well-drained sub-base and full joints matter as much as the blocks.

In Scotland block paving is often called monoblock; it is the same thing, and the same rules for the base, edging and drainage apply.

How much does a block paved driveway cost in Dundee?

Guide price in Dundee£85–£140 per m²Including VAT at 20%

Most block paved driveway quotes in Scotland fall within £85–£140 per m² including VAT. A 50 m² double drive would usually be about £4,250–£7,000, with any extras listed separately on your quote.

ItemGuide price inc VAT
Concrete block driveway, new sub-base£85–£140 per m²
Breaking out an old surface£10–£40 per m²
Edging or kerb, bedded and haunched£20–£50 per metre
Typical channel drain run£350–£1,000
Dropped kerb (vehicle crossover) construction£1,000–£3,000

Guide figures for Scotland, checked 9 November 2026. See all prices or use the guide price tool.

What you get with our block paved driveways service

A block paved driveway is a surface of small concrete or clay blocks laid tightly on a bed of sharp sand, held in by a fixed edge and locked together with kiln-dried jointing sand. Laid on a properly dug and compacted sub-base, it carries cars for decades, and a single damaged block can be lifted and replaced without breaking the surface.

  • Sharp-sand laying course screeded to falls
  • Crushed-stone sub-base laid in layers and compacted
  • Blocks laid in your chosen pattern, with a contrasting border if wanted
  • Survey, measurements and a written, itemised quote
  • Removal of the old surface and soil to the agreed depth, with waste taken away

Before we price your block paved driveway

  • Levels against the damp-proof course (the finished paving must sit at least 150 mm below it)
  • Trees and roots near the drive
  • Block range, thickness, colour and pattern to suit the house
  • Access for a mini-digger, skip or grab lorry
  • Steps, thresholds and door heights

Planning and kerb rules in Dundee

Dundee is in Scotland, so these rules apply:

In Scotland, a hard surface between the house and the road is permitted development only if it is porous or drains to a permeable area within the property. There is no 5 m² threshold: the rule applies whatever the size.

Hard surfaces are not permitted development in a conservation area or within the grounds of a listed building, so planning permission is needed there.

A dropped kerb needs consent from your council as roads authority under section 56 of the Roads (Scotland) Act 1984, and planning permission may also be needed depending on the road.

General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.

How it works

  1. Send the basics

    Postcode, what you need and a rough size. Photos help.

  2. Survey

    We measure, check levels, ground and drainage, and talk through blocks and patterns.

  3. Written quote

    An itemised quote with the specification, the price and the start date.

  4. The work

    Our paving team builds it to the agreed specification and leaves the site swept.

Why choose Block Paving Contractors

Edges set in concrete

Every edge restraint is bedded and haunched, so the paving cannot creep.

One point of contact

You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.

Repair before replace

If your drive can be fixed or re-laid, we will say so.

The dig and sub-base in writing

Your quote states the depth of dig, the sub-base thickness and how it is compacted.

Block paved driveways in Dundee: questions

How much does a block paved driveway cost in Dundee?

Our guide for Dundee is £85–£140 per m² including VAT, so a 50 m² double drive is usually about £4,250–£7,000. Your fixed price follows the survey.

Do I need planning permission for a block paved driveway in Dundee?

In Scotland, front paving must be porous or drain within your boundary at any size, and permitted development does not apply in conservation areas. Ask us on the survey if you are unsure.

Is the survey in Dundee free?

Yes, for new paving here: the survey and written quote are free with no obligation. Repairs and cleaning are usually priced from photos, or from a short visit where needed.

Do you cover Monifieth, Carnoustie and Forfar?

Yes. We cover Dundee and the places around it, including Monifieth, Carnoustie and Forfar, and the rest of Dundee and Angus.

Block paved driveways near Dundee

Nearby towns we cover for block paved driveways, and block paved driveways across Dundee and Angus:

Other block paving services in Dundee

Or see all block paving services in Dundee.

Next step

Get a guide price in two minutes

Tell us what you have in mind for Dundee, and we will put a written price together.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote