Dumfries and Galloway · Block paved driveways

Block paving driveways in Annan

If you are in Annan (DG12, DG16) and want a block paved driveway, we will come out, measure up and give you a fixed written price once the specification is agreed.

  • Postcodes DG12, DG16
  • £85–£140 per m² inc VAT
  • Free survey for new paving
Silver-grey herringbone block paved driveway with a charcoal border in front of a detached house

Block paving driveways in Annan: the local picture

In and around Annan, village-style frontages sit alongside newer cul-de-sacs, so the right block often depends on the age of the house.

In Scotland, front paving must be porous or drain within the property whatever its size, so drainage is part of every design.

In Scotland block paving is often called monoblock; it is the same thing, and the same rules for the base, edging and drainage apply.

How much does a block paved driveway cost in Annan?

Guide price in Annan£85–£140 per m²Including VAT at 20%

Guide price in Annan: £85–£140 per m² including VAT, which puts a 50 m² double drive at about £4,250–£7,000. These are Scotland guide figures; the survey confirms the real price before you commit.

ItemGuide price inc VAT
Concrete block driveway, new sub-base£85–£140 per m²
Breaking out an old surface£10–£40 per m²
Edging or kerb, bedded and haunched£20–£50 per metre
Typical channel drain run£350–£1,000
Dropped kerb (vehicle crossover) construction£1,000–£3,000

Guide figures for Scotland, checked 9 November 2026. See all prices or use the guide price tool.

What you get with our block paved driveways service

A block paved driveway is a surface of small concrete or clay blocks laid tightly on a bed of sharp sand, held in by a fixed edge and locked together with kiln-dried jointing sand. Laid on a properly dug and compacted sub-base, it carries cars for decades, and a single damaged block can be lifted and replaced without breaking the surface.

  • Survey, measurements and a written, itemised quote
  • Cuts at edges, around covers and against the house
  • Removal of the old surface and soil to the agreed depth, with waste taken away
  • Blocks laid in your chosen pattern, with a contrasting border if wanted
  • Edge restraints or kerbs bedded and haunched in concrete

Before we price your block paved driveway

  • Block range, thickness, colour and pattern to suit the house
  • Whether front-garden planning rules apply
  • Trees and roots near the drive
  • Where an electric vehicle charger cable might run
  • Levels against the damp-proof course (the finished paving must sit at least 150 mm below it)

Planning and kerb rules in Annan

Annan is in Scotland, so these rules apply:

In Scotland, a hard surface between the house and the road is permitted development only if it is porous or drains to a permeable area within the property. There is no 5 m² threshold: the rule applies whatever the size.

Hard surfaces are not permitted development in a conservation area or within the grounds of a listed building, so planning permission is needed there.

A dropped kerb needs consent from your council as roads authority under section 56 of the Roads (Scotland) Act 1984, and planning permission may also be needed depending on the road.

General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.

How it works

  1. Send the basics

    Postcode, what you need and a rough size. Photos help.

  2. Survey

    We measure, check levels, ground and drainage, and talk through blocks and patterns.

  3. Written quote

    An itemised quote with the specification, the price and the start date.

  4. The work

    Our paving team builds it to the agreed specification and leaves the site swept.

What you can expect from us

Edges set in concrete

Every edge restraint is bedded and haunched, so the paving cannot creep.

One point of contact

You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.

Itemised quotes

Break-out, waste, edging, drainage and covers are separate lines you can see.

Honest timescales

We tell you how long the job takes and what can delay it, such as approvals and weather.

Block paved driveways in Annan: questions

Do I need planning permission for a block paved driveway in Annan?

In Scotland, front paving must be porous or drain within your boundary at any size, and permitted development does not apply in conservation areas. Ask us on the survey if you are unsure.

Can you match the blocks to my house in Annan?

We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.

What happens to my old drive?

It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.

How much does a block paved driveway cost in Annan?

Our guide for Annan is £85–£140 per m² including VAT, so a 50 m² double drive is usually about £4,250–£7,000. Your fixed price follows the survey.

Block paved driveways near Annan

Nearby towns we cover for block paved driveways, and block paved driveways across Dumfries and Galloway:

Other block paving services in Annan

Or see all block paving services in Annan.

Next step

Get a guide price in two minutes

Tell us what you have in mind for Annan, and we will put a written price together.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote