County Armagh · Block paved driveways

Block paving driveways in Armagh

We quote block paved driveways throughout Armagh and County Armagh. The survey sets the depth of dig and the drainage; the pattern and colour are your choice.

  • Postcodes BT61, BT60
  • £80–£135 per m² inc VAT
  • Free survey for new paving
Silver-grey herringbone block paved driveway with a charcoal border in front of a detached house

What to know before a block paved driveway in Armagh

In and around Armagh, village-style frontages sit alongside newer cul-de-sacs, so the right block often depends on the age of the house.

Dropped kerbs in Northern Ireland go through DfI Roads, so we build that timing into the plan for new drives.

How much does a block paved driveway cost in Armagh?

Guide price in Armagh£80–£135 per m²Including VAT at 20%

Expect block paved driveways in Armagh to come in at around £80–£135 per m², including VAT at 20%. As an example, a 50 m² double drive usually comes to between £4,050 and £6,650.

ItemGuide price inc VAT
Concrete block driveway, new sub-base£80–£135 per m²
Breaking out an old surface£9.50–£40 per m²
Edging or kerb, bedded and haunched£19–£50 per metre
Typical channel drain run£330–£950
Dropped kerb (vehicle crossover) construction£950–£2,850

Guide figures for Northern Ireland, checked 9 November 2026. See all prices or use the guide price tool.

What is included?

A block paved driveway is a surface of small concrete or clay blocks laid tightly on a bed of sharp sand, held in by a fixed edge and locked together with kiln-dried jointing sand. Laid on a properly dug and compacted sub-base, it carries cars for decades, and a single damaged block can be lifted and replaced without breaking the surface.

  • Survey, measurements and a written, itemised quote
  • Blocks laid in your chosen pattern, with a contrasting border if wanted
  • Sharp-sand laying course screeded to falls
  • Removal of the old surface and soil to the agreed depth, with waste taken away
  • Kiln-dried sand brushed in and the surface vibrated with a plate compactor

Before we price your block paved driveway

  • Ground conditions under the old surface and how deep the sub-base must be
  • Block range, thickness, colour and pattern to suit the house
  • Access for a mini-digger, skip or grab lorry
  • Trees and roots near the drive
  • Whether front-garden planning rules apply

Planning and kerb rules in Armagh

Armagh is in Northern Ireland, so these rules apply:

In Northern Ireland, a hard surface between the front of the house and the road that covers or replaces more than 5 m² must be porous or permeable, or drain to a permeable area within the property, to be permitted development.

Hard surfaces within the grounds of a listed building need listed building consent. Planning is handled by your district council, so check with its planning office if you are unsure.

Dropped kerbs in Northern Ireland are approved by DfI Roads (the Department for Infrastructure), not the council; check planning separately with the council.

General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.

How it works

  1. Tell us about the job

    Use the form, the quote tool, WhatsApp or a call.

  2. We take a look

    A survey visit, or photos for smaller repair and cleaning jobs.

  3. Price in writing

    Every line itemised, including the dig, edging and drainage.

  4. Booked and built

    Agreed start date, then the work, the final clean-down and the joint top-up.

What you can expect from us

The dig and sub-base in writing

Your quote states the depth of dig, the sub-base thickness and how it is compacted.

Repair before replace

If your drive can be fixed or re-laid, we will say so.

Water planned first

Falls, channels and soakaways are designed before the pattern is chosen.

Honest timescales

We tell you how long the job takes and what can delay it, such as approvals and weather.

Block paved driveways in Armagh: questions

What happens to my old drive?

It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.

Is the survey in Armagh free?

Yes, for new paving here: the survey and written quote are free with no obligation. Repairs and cleaning are usually priced from photos, or from a short visit where needed.

How much does a block paved driveway cost in Armagh?

Our guide for Armagh is £80–£135 per m² including VAT, so a 50 m² double drive is usually about £4,050–£6,650. Your fixed price follows the survey.

How long does a block paved driveway take to build?

Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.

Block paved driveways near Armagh

Nearby towns we cover for block paved driveways, and block paved driveways across County Armagh:

Other block paving services in Armagh

Or see all block paving services in Armagh.

Next step

Get a guide price in two minutes

Ready to talk about your block paved driveway? Send your postcode and a few details, and we will arrange the next step.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote