Clwyd · Block paved driveways

Block paving driveways in Colwyn Bay

We quote block paved driveways throughout Colwyn Bay and Clwyd. The survey sets the depth of dig and the drainage; the pattern and colour are your choice.

  • Postcodes LL29, LL28
  • £80–£130 per m² inc VAT
  • Free survey for new paving
Silver-grey herringbone block paved driveway with a charcoal border in front of a detached house

Block paving driveways in Colwyn Bay: the local picture

Homes in Colwyn Bay include plenty of semis and detached houses with room for a drive, plus older terraces where parking is tighter.

Wales is wetter than most of England, and new front paving has to be permeable or drain within the property, so drainage is designed in from the start.

How much does a block paved driveway cost in Colwyn Bay?

Guide price in Colwyn Bay£80–£130 per m²Including VAT at 20%

For Colwyn Bay, our guide is £80–£130 per m² including VAT, so a 50 m² double drive is likely to be £3,950–£6,500. Smaller jobs cost more per square metre because set-up and waste costs do not shrink with the area.

ItemGuide price inc VAT
Concrete block driveway, new sub-base£80–£130 per m²
Breaking out an old surface£9.50–£35 per m²
Edging or kerb, bedded and haunched£19–£45 per metre
Typical channel drain run£330–£930
Dropped kerb (vehicle crossover) construction£930–£2,800

Guide figures for Wales, checked 9 November 2026. See all prices or use the guide price tool.

What you get with our block paved driveways service

We build block drives for homeowners from scratch: digging out the old surface, setting edge restraints in concrete, building and compacting the sub-base, screeding the laying course, laying the pattern, cutting in the edges and vibrating the blocks into the sand. Every quote states the depth of dig, the sub-base thickness, the edging, the falls and where the water goes.

  • Blocks laid in your chosen pattern, with a contrasting border if wanted
  • Sharp-sand laying course screeded to falls
  • Cuts at edges, around covers and against the house
  • Edge restraints or kerbs bedded and haunched in concrete
  • Kiln-dried sand brushed in and the surface vibrated with a plate compactor

What we check on a Colwyn Bay survey

  • Levels against the damp-proof course (the finished paving must sit at least 150 mm below it)
  • Ground conditions under the old surface and how deep the sub-base must be
  • Existing manhole and inspection covers, and whether to recess them
  • Edges against lawns, beds, walls and neighbours
  • Trees and roots near the drive

Do you need permission in Colwyn Bay?

Colwyn Bay is in Wales, so these rules apply:

In Wales, any new or replacement hard surface at the front of a house should be permeable or drain to a permeable area within the property to avoid needing planning permission. Unlike England, there is no 5 m² allowance for new paving; only repairs of up to 5 m² of existing surface are exempt.

Since January 2019, construction work covering 100 m² or more with drainage implications, including drives and patios, needs approval from the local SuDS Approving Body (SAB) before work starts, even where planning permission is not needed.

A dropped kerb needs your council's approval as highway authority, and a new access onto a classified road needs planning permission.

General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.

What happens next

  1. Tell us about the job

    Use the form, the quote tool, WhatsApp or a call.

  2. We take a look

    A survey visit, or photos for smaller repair and cleaning jobs.

  3. Price in writing

    Every line itemised, including the dig, edging and drainage.

  4. Booked and built

    Agreed start date, then the work, the final clean-down and the joint top-up.

How we work

Honest timescales

We tell you how long the job takes and what can delay it, such as approvals and weather.

Itemised quotes

Break-out, waste, edging, drainage and covers are separate lines you can see.

The dig and sub-base in writing

Your quote states the depth of dig, the sub-base thickness and how it is compacted.

One point of contact

You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.

Block paved driveways in Colwyn Bay: questions

Do I need planning permission for a block paved driveway in Colwyn Bay?

In Wales, new front paving should be permeable or drain within your boundary to avoid planning permission, and drives of 100 m² or more need SuDS approval. Ask us on the survey if you are unsure.

Is the survey in Colwyn Bay free?

Yes, for new paving here: the survey and written quote are free with no obligation. Repairs and cleaning are usually priced from photos, or from a short visit where needed.

Can you match the blocks to my house in Colwyn Bay?

We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.

How much does a block paved driveway cost in Colwyn Bay?

Our guide for Colwyn Bay is £80–£130 per m² including VAT, so a 50 m² double drive is usually about £3,950–£6,500. Your fixed price follows the survey.

Block paved driveways near Colwyn Bay

Nearby towns we cover for block paved driveways, and block paved driveways across Clwyd:

Other block paving services in Colwyn Bay

Or see all block paving services in Colwyn Bay.

Next step

Get a guide price in two minutes

Call, WhatsApp or use the form, and we will come back to you to arrange a visit or a price from photos.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote