Ayrshire · Block paved driveways

Block paving driveways in Kilwinning

Our block paving driveways service covers Kilwinning and nearby Stevenston, from first measurements to the final sweep of kiln-dried sand. You get a written, itemised quote before anything is booked.

  • Postcodes KA13, KA24, KA14
  • £85–£140 per m² inc VAT
  • Free survey for new paving
Silver-grey herringbone block paved driveway with a charcoal border in front of a detached house

Block paving driveways in Kilwinning: the local picture

Kilwinning is a smaller town, and many of its homes have more frontage to work with than city houses, which leaves room for borders and planting.

In Scotland, front paving must be porous or drain within the property whatever its size, so drainage is part of every design.

In Scotland block paving is often called monoblock; it is the same thing, and the same rules for the base, edging and drainage apply.

How much does a block paved driveway cost in Kilwinning?

Guide price in Kilwinning£85–£140 per m²Including VAT at 20%

Expect block paved driveways in Kilwinning to come in at around £85–£140 per m², including VAT at 20%. As an example, a 50 m² double drive usually comes to between £4,250 and £7,000.

ItemGuide price inc VAT
Concrete block driveway, new sub-base£85–£140 per m²
Breaking out an old surface£10–£40 per m²
Edging or kerb, bedded and haunched£20–£50 per metre
Typical channel drain run£350–£1,000
Dropped kerb (vehicle crossover) construction£1,000–£3,000

Guide figures for Scotland, checked 9 November 2026. See all prices or use the guide price tool.

What does a block paved driveway involve?

A block paved driveway is a surface of small concrete or clay blocks laid tightly on a bed of sharp sand, held in by a fixed edge and locked together with kiln-dried jointing sand. Laid on a properly dug and compacted sub-base, it carries cars for decades, and a single damaged block can be lifted and replaced without breaking the surface.

  • Kiln-dried sand brushed in and the surface vibrated with a plate compactor
  • Survey, measurements and a written, itemised quote
  • Edge restraints or kerbs bedded and haunched in concrete
  • Sharp-sand laying course screeded to falls
  • Crushed-stone sub-base laid in layers and compacted

Before we price your block paved driveway

  • Where rain will go: falls, lawn, border, channel or soakaway
  • Existing manhole and inspection covers, and whether to recess them
  • Block range, thickness, colour and pattern to suit the house
  • Steps, thresholds and door heights
  • Levels against the damp-proof course (the finished paving must sit at least 150 mm below it)

Do you need permission in Kilwinning?

Kilwinning is in Scotland, so these rules apply:

In Scotland, a hard surface between the house and the road is permitted development only if it is porous or drains to a permeable area within the property. There is no 5 m² threshold: the rule applies whatever the size.

Hard surfaces are not permitted development in a conservation area or within the grounds of a listed building, so planning permission is needed there.

A dropped kerb needs consent from your council as roads authority under section 56 of the Roads (Scotland) Act 1984, and planning permission may also be needed depending on the road.

General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.

From enquiry to finished paving

  1. Send the basics

    Postcode, what you need and a rough size. Photos help.

  2. Survey

    We measure, check levels, ground and drainage, and talk through blocks and patterns.

  3. Written quote

    An itemised quote with the specification, the price and the start date.

  4. The work

    Our paving team builds it to the agreed specification and leaves the site swept.

Why choose Block Paving Contractors

Clean finish

The site is swept, the joints are filled and you are shown how to look after the paving.

Water planned first

Falls, channels and soakaways are designed before the pattern is chosen.

Edges set in concrete

Every edge restraint is bedded and haunched, so the paving cannot creep.

The dig and sub-base in writing

Your quote states the depth of dig, the sub-base thickness and how it is compacted.

Block paved driveways in Kilwinning: questions

Can you match the blocks to my house in Kilwinning?

We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.

What happens to my old drive?

It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.

Is the survey in Kilwinning free?

Yes, for new paving here: the survey and written quote are free with no obligation. Repairs and cleaning are usually priced from photos, or from a short visit where needed.

Do you cover Stevenston, Irvine and Saltcoats?

Yes. We cover Kilwinning and the places around it, including Stevenston, Irvine and Saltcoats, and the rest of Ayrshire.

Block paved driveways near Kilwinning

Nearby towns we cover for block paved driveways, and block paved driveways across Ayrshire:

Other block paving services in Kilwinning

Or see all block paving services in Kilwinning.

Next step

Get a guide price in two minutes

Get a guide price in a couple of minutes with our quote tool, or book a survey in Kilwinning.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote