Ayrshire · Block paved driveways

Block paving driveways in Ayr

Block paving driveways in Ayr: built on a properly dug and compacted base, edged in concrete and laid to falls that take water away from the house.

  • Postcodes KA7, KA6
  • £85–£140 per m² inc VAT
  • Free survey for new paving
Silver-grey herringbone block paved driveway with a charcoal border in front of a detached house

Planning a block paved driveway in Ayr

Ayr is a sizeable town with a mix of semis, terraces and newer estates, and many drives here were first laid decades ago.

Frost and heavy rain test paving in Scotland, so a well-drained sub-base and full joints matter as much as the blocks.

In Scotland block paving is often called monoblock; it is the same thing, and the same rules for the base, edging and drainage apply.

How much does a block paved driveway cost in Ayr?

Guide price in Ayr£85–£140 per m²Including VAT at 20%

For Ayr, our guide is £85–£140 per m² including VAT, so a 50 m² double drive is likely to be £4,250–£7,000. Smaller jobs cost more per square metre because set-up and waste costs do not shrink with the area.

ItemGuide price inc VAT
Concrete block driveway, new sub-base£85–£140 per m²
Breaking out an old surface£10–£40 per m²
Edging or kerb, bedded and haunched£20–£50 per metre
Typical channel drain run£350–£1,000
Dropped kerb (vehicle crossover) construction£1,000–£3,000

Guide figures for Scotland, checked 9 November 2026. See all prices or use the guide price tool.

What does a block paved driveway involve?

We build block drives for homeowners from scratch: digging out the old surface, setting edge restraints in concrete, building and compacting the sub-base, screeding the laying course, laying the pattern, cutting in the edges and vibrating the blocks into the sand. Every quote states the depth of dig, the sub-base thickness, the edging, the falls and where the water goes.

  • Cuts at edges, around covers and against the house
  • Survey, measurements and a written, itemised quote
  • Removal of the old surface and soil to the agreed depth, with waste taken away
  • Sharp-sand laying course screeded to falls
  • Blocks laid in your chosen pattern, with a contrasting border if wanted

Before we price your block paved driveway

  • Where an electric vehicle charger cable might run
  • Existing manhole and inspection covers, and whether to recess them
  • Steps, thresholds and door heights
  • Whether front-garden planning rules apply
  • Edges against lawns, beds, walls and neighbours

Rules for front drives in Ayr

Ayr is in Scotland, so these rules apply:

In Scotland, a hard surface between the house and the road is permitted development only if it is porous or drains to a permeable area within the property. There is no 5 m² threshold: the rule applies whatever the size.

Hard surfaces are not permitted development in a conservation area or within the grounds of a listed building, so planning permission is needed there.

A dropped kerb needs consent from your council as roads authority under section 56 of the Roads (Scotland) Act 1984, and planning permission may also be needed depending on the road.

General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.

From enquiry to finished paving

  1. Tell us about the job

    Use the form, the quote tool, WhatsApp or a call.

  2. We take a look

    A survey visit, or photos for smaller repair and cleaning jobs.

  3. Price in writing

    Every line itemised, including the dig, edging and drainage.

  4. Booked and built

    Agreed start date, then the work, the final clean-down and the joint top-up.

How we work

Itemised quotes

Break-out, waste, edging, drainage and covers are separate lines you can see.

One point of contact

You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.

Repair before replace

If your drive can be fixed or re-laid, we will say so.

Honest timescales

We tell you how long the job takes and what can delay it, such as approvals and weather.

Block paved driveways in Ayr: questions

What happens to my old drive?

It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.

How much does a block paved driveway cost in Ayr?

Our guide for Ayr is £85–£140 per m² including VAT, so a 50 m² double drive is usually about £4,250–£7,000. Your fixed price follows the survey.

Can you match the blocks to my house in Ayr?

We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.

Is the survey in Ayr free?

Yes, for new paving here: the survey and written quote are free with no obligation. Repairs and cleaning are usually priced from photos, or from a short visit where needed.

Block paved driveways near Ayr

Nearby towns we cover for block paved driveways, and block paved driveways across Ayrshire:

Other block paving services in Ayr

Or see all block paving services in Ayr.

Next step

Get a guide price in two minutes

Call, WhatsApp or use the form, and we will come back to you to arrange a visit or a price from photos.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote