Mid Glamorgan · Cleaning

Block paving cleaning in Mountain Ash

We quote block paving cleaning and care across Mountain Ash and Mid Glamorgan, working from photos or a quick visit to give you a fixed price.

  • Postcodes CF45
  • £2.50–£4.50 per m² inc VAT
  • Free survey for new paving
Rotary surface cleaner cleaning a block paved drive, half clean and half stained

Block paving cleaning in Mountain Ash: the local picture

Mountain Ash is a smaller town, and many of its homes have more frontage to work with than city houses, which leaves room for borders and planting.

Hilly streets in much of Wales mean many drives slope, which shapes the falls, the edging and the water route.

How much does a block paving cleaning job cost in Mountain Ash?

Guide price in Mountain Ash£2.50–£4.50 per m²Including VAT at 20%

Most block paving cleaning job quotes in Wales fall within £2.50–£4.50 per m² including VAT. A 50 m² drive would usually be about £115–£235, with any extras listed separately on your quote.

ItemGuide price inc VAT
Jet wash clean with a rotary cleaner£2.50–£4.50 per m²
Clean and re-sand£4.50–£9.50 per m²
Clean, re-sand and seal£7.50–£19 per m²
Sealing only£4.50–£14 per m²

Guide figures for Wales, checked 9 November 2026. See all prices or use the guide price tool.

What you get with our cleaning service

Block paving cleaning removes moss, algae, weeds and ground-in dirt from the surface and the joints, usually with a rotary surface cleaner on a pressure washer, which cleans evenly without the stripes a hand lance leaves. A biocide treatment can be applied to slow regrowth.

  • Pre-treatment where needed
  • Weeds and moss removed from the joints
  • Kiln-dried sand brushed in once dry (re-sanding package)
  • Rotary surface clean at a pressure that will not blow out the joints
  • Rinse down of edges, steps and walls

What we look at first in Mountain Ash

  • Which sealer finish suits a slope or patio
  • Walls, doors and planting to protect
  • Moss, algae, weeds and oil staining
  • How much joint sand is left
  • Whether any blocks are loose or sunken first

How it works

  1. Quick details

    Your postcode and the job. It takes a minute.

  2. On-site check

    Measurements, levels against the damp-proof course, ground and drainage.

  3. Itemised quote

    Fixed once the specification is agreed, with no vague extras.

  4. Laid and finished

    Compacted, jointed and handed back clean.

Why choose Block Paving Contractors

Repair before replace

If your drive can be fixed or re-laid, we will say so.

One point of contact

You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.

Edges set in concrete

Every edge restraint is bedded and haunched, so the paving cannot creep.

Clean finish

The site is swept, the joints are filled and you are shown how to look after the paving.

Cleaning in Mountain Ash: questions

Do you cover Treharris, Aberdare and Merthyr Tydfil?

Yes. We cover Mountain Ash and the places around it, including Treharris, Aberdare and Merthyr Tydfil, and the rest of Mid Glamorgan.

Can you seal my drive straight after cleaning?

Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.

Will cleaning damage my block paving?

Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.

How much does a block paving cleaning job cost in Mountain Ash?

Guide price for Mountain Ash: £2.50–£4.50 per m² including VAT, with a minimum charge for small areas.

Cleaning near Mountain Ash

Nearby towns we cover for cleaning, and cleaning across Mid Glamorgan:

Other block paving services in Mountain Ash

Or see all block paving services in Mountain Ash.

Next step

Get a guide price in two minutes

Want a number before a visit? Try the guide price tool, then book a survey to fix it.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote