Planning a block paving cleaning job in Aberdare
Aberdare is a sizeable town with a mix of semis, terraces and newer estates, and many drives here were first laid decades ago.
Hilly streets in much of Wales mean many drives slope, which shapes the falls, the edging and the water route.
How much does a block paving cleaning job cost in Aberdare?
In Wales, a block paving cleaning job usually costs £2.50–£4.50 per m² including VAT. For a 50 m² drive, that is roughly £115–£235. Your exact price depends on what the survey or your photos show, and is fixed in writing before anything is booked.
| Item | Guide price inc VAT |
|---|---|
| Jet wash clean with a rotary cleaner | £2.50–£4.50 per m² |
| Clean and re-sand | £4.50–£9.50 per m² |
| Clean, re-sand and seal | £7.50–£19 per m² |
| Sealing only | £4.50–£14 per m² |
Guide figures for Wales, checked 9 November 2026. See all prices or use the guide price tool.
What does a block paving cleaning job involve?
Block paving cleaning removes moss, algae, weeds and ground-in dirt from the surface and the joints, usually with a rotary surface cleaner on a pressure washer, which cleans evenly without the stripes a hand lance leaves. A biocide treatment can be applied to slow regrowth.
- Optional biocide and sealer
- Pre-treatment where needed
- Rinse down of edges, steps and walls
- Kiln-dried sand brushed in once dry (re-sanding package)
- Rotary surface clean at a pressure that will not blow out the joints
Before we price your block paving cleaning job
- Walls, doors and planting to protect
- Shade and drainage, which affect regrowth
- Which sealer finish suits a slope or patio
- Whether the paving is permeable (no sand, no sealing with the wrong product)
- Whether any blocks are loose or sunken first
How it works
Quick details
Your postcode and the job. It takes a minute.
On-site check
Measurements, levels against the damp-proof course, ground and drainage.
Itemised quote
Fixed once the specification is agreed, with no vague extras.
Laid and finished
Compacted, jointed and handed back clean.
Why choose Block Paving Contractors
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
Cleaning in Aberdare: questions
Do you cover Mountain Ash, Merthyr Tydfil and Tonypandy?
Yes. We cover Aberdare and the places around it, including Mountain Ash, Merthyr Tydfil and Tonypandy, and the rest of Mid Glamorgan.
Will cleaning damage my block paving?
Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.
Can you seal my drive straight after cleaning?
Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.
How much does a block paving cleaning job cost in Aberdare?
Guide price for Aberdare: £2.50–£4.50 per m² including VAT, with a minimum charge for small areas.
Cleaning near Aberdare
Nearby towns we cover for cleaning, and cleaning across Mid Glamorgan:
- Cleaning in Mountain Ash
- Cleaning in Merthyr Tydfil
- Cleaning in Tonypandy
- Cleaning in Treharris
- Cleaning in Nelson, Mid Glamorgan
- Cleaning in Pontypridd
