Kent · Cleaning

Block paving cleaning in Margate

Block paving cleaning in Margate: done properly, it lifts years of moss and grime and leaves the joints full and tight.

  • Postcodes CT9, CT8, CT7
  • £2.50–£5.50 per m² inc VAT
  • Free survey for new paving
Rotary surface cleaner cleaning a block paved drive, half clean and half stained

Block paving cleaning in Margate: what to expect

Margate is a sizeable town with a mix of semis, terraces and newer estates, and many drives here were first laid decades ago.

Planning-sensitive towns and conservation areas are common in the South East, so we check the front-garden rules before quoting.

How much does a block paving cleaning job cost in Margate?

Guide price in Margate£2.50–£5.50 per m²Including VAT at 20%

In the South East, a block paving cleaning job usually costs £2.50–£5.50 per m² including VAT. For a 50 m² drive, that is roughly £135–£270. Your exact price depends on what the survey or your photos show, and is fixed in writing before anything is booked.

ItemGuide price inc VAT
Jet wash clean with a rotary cleaner£2.50–£5.50 per m²
Clean and re-sand£5.50–£11 per m²
Clean, re-sand and seal£8.50–£20 per m²
Sealing only£5.50–£16 per m²

Guide figures for the South East, checked 9 November 2026. See all prices or use the guide price tool.

What you get with our cleaning service

Block paving cleaning removes moss, algae, weeds and ground-in dirt from the surface and the joints, usually with a rotary surface cleaner on a pressure washer, which cleans evenly without the stripes a hand lance leaves. A biocide treatment can be applied to slow regrowth.

  • Rotary surface clean at a pressure that will not blow out the joints
  • Pre-treatment where needed
  • Weeds and moss removed from the joints
  • Rinse down of edges, steps and walls
  • Kiln-dried sand brushed in once dry (re-sanding package)

What we look at first in Margate

  • Shade and drainage, which affect regrowth
  • Moss, algae, weeds and oil staining
  • Type of block and its age
  • How much joint sand is left
  • Whether the paving is permeable (no sand, no sealing with the wrong product)

From enquiry to finished paving

  1. Tell us about the job

    Use the form, the quote tool, WhatsApp or a call.

  2. We take a look

    A survey visit, or photos for smaller repair and cleaning jobs.

  3. Price in writing

    Every line itemised, including the dig, edging and drainage.

  4. Booked and built

    Agreed start date, then the work, the final clean-down and the joint top-up.

What you can expect from us

Itemised quotes

Break-out, waste, edging, drainage and covers are separate lines you can see.

Clean finish

The site is swept, the joints are filled and you are shown how to look after the paving.

The dig and sub-base in writing

Your quote states the depth of dig, the sub-base thickness and how it is compacted.

Repair before replace

If your drive can be fixed or re-laid, we will say so.

Cleaning in Margate: questions

Can you seal my drive straight after cleaning?

Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.

How often should block paving in Margate be cleaned?

Every two to four years for most drives, more often for shaded or north-facing paving.

Do you cover Broadstairs, Ramsgate and Deal?

Yes. We cover Margate and the places around it, including Broadstairs, Ramsgate and Deal, and the rest of Kent.

Will cleaning damage my block paving?

Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.

Cleaning near Margate

Nearby towns we cover for cleaning, and cleaning across Kent:

Other block paving services in Margate

Or see all block paving services in Margate.

Next step

Get a guide price in two minutes

Get a guide price in a couple of minutes with our quote tool, or book a survey in Margate.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote