Kent · Cleaning

Block paving cleaning in Canterbury

We quote block paving cleaning and care across Canterbury and Kent, working from photos or a quick visit to give you a fixed price.

  • Postcodes CT1, CT2, CT4
  • £2.50–£5.50 per m² inc VAT
  • Free survey for new paving
Rotary surface cleaner cleaning a block paved drive, half clean and half stained

Block paving cleaning in Canterbury: what to expect

Canterbury is a sizeable town with a mix of semis, terraces and newer estates, and many drives here were first laid decades ago.

Planning-sensitive towns and conservation areas are common in the South East, so we check the front-garden rules before quoting.

How much does a block paving cleaning job cost in Canterbury?

Guide price in Canterbury£2.50–£5.50 per m²Including VAT at 20%

Most block paving cleaning job quotes in the South East fall within £2.50–£5.50 per m² including VAT. A 50 m² drive would usually be about £135–£270, with any extras listed separately on your quote.

ItemGuide price inc VAT
Jet wash clean with a rotary cleaner£2.50–£5.50 per m²
Clean and re-sand£5.50–£11 per m²
Clean, re-sand and seal£8.50–£20 per m²
Sealing only£5.50–£16 per m²

Guide figures for the South East, checked 9 November 2026. See all prices or use the guide price tool.

What does a block paving cleaning job involve?

Block paving cleaning removes moss, algae, weeds and ground-in dirt from the surface and the joints, usually with a rotary surface cleaner on a pressure washer, which cleans evenly without the stripes a hand lance leaves. A biocide treatment can be applied to slow regrowth.

  • Kiln-dried sand brushed in once dry (re-sanding package)
  • Weeds and moss removed from the joints
  • Optional biocide and sealer
  • Rinse down of edges, steps and walls
  • Rotary surface clean at a pressure that will not blow out the joints

What we look at first in Canterbury

  • Moss, algae, weeds and oil staining
  • Whether any blocks are loose or sunken first
  • Type of block and its age
  • How much joint sand is left
  • Walls, doors and planting to protect

How it works

  1. Quick details

    Your postcode and the job. It takes a minute.

  2. On-site check

    Measurements, levels against the damp-proof course, ground and drainage.

  3. Itemised quote

    Fixed once the specification is agreed, with no vague extras.

  4. Laid and finished

    Compacted, jointed and handed back clean.

Why choose Block Paving Contractors

Clean finish

The site is swept, the joints are filled and you are shown how to look after the paving.

Repair before replace

If your drive can be fixed or re-laid, we will say so.

Edges set in concrete

Every edge restraint is bedded and haunched, so the paving cannot creep.

Honest timescales

We tell you how long the job takes and what can delay it, such as approvals and weather.

Cleaning in Canterbury: questions

Will cleaning damage my block paving?

Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.

How often should block paving in Canterbury be cleaned?

Every two to four years for most drives, more often for shaded or north-facing paving.

Can you seal my drive straight after cleaning?

Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.

How much does a block paving cleaning job cost in Canterbury?

Guide price for Canterbury: £2.50–£5.50 per m² including VAT, with a minimum charge for small areas.

Cleaning near Canterbury

Nearby towns we cover for cleaning, and cleaning across Kent:

Other block paving services in Canterbury

Or see all block paving services in Canterbury.

Next step

Get a guide price in two minutes

Tell us what you have in mind for Canterbury, and we will put a written price together.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote