Greater London · Cleaning

Block paving cleaning in Brent

We clean, re-sand and seal block paving across Brent (HA0, HA9), using a rotary cleaner at a pressure that will not damage the blocks.

  • Postcodes HA0, HA9
  • £3–£6 per m² inc VAT
  • Free survey for new paving
Rotary surface cleaner cleaning a block paved drive, half clean and half stained

Block paving cleaning in Brent: what to expect

Brent has everything from short terrace frontages to wide drives on newer estates, so the survey sets the layout and the dig.

Many London streets have controlled parking and narrow frontages, so we measure the car space and the crossover before anything else.

How much does a block paving cleaning job cost in Brent?

Guide price in Brent£3–£6 per m²Including VAT at 20%

Most block paving cleaning job quotes in London fall within £3–£6 per m² including VAT. A 50 m² drive would usually be about £150–£300, with any extras listed separately on your quote.

ItemGuide price inc VAT
Jet wash clean with a rotary cleaner£3–£6 per m²
Clean and re-sand£6–£12 per m²
Clean, re-sand and seal£9.50–£25 per m²
Sealing only£6–£18 per m²

Guide figures for London, checked 9 November 2026. See all prices or use the guide price tool.

What you get with our cleaning service

Block paving cleaning removes moss, algae, weeds and ground-in dirt from the surface and the joints, usually with a rotary surface cleaner on a pressure washer, which cleans evenly without the stripes a hand lance leaves. A biocide treatment can be applied to slow regrowth.

  • Rinse down of edges, steps and walls
  • Weeds and moss removed from the joints
  • Optional biocide and sealer
  • Kiln-dried sand brushed in once dry (re-sanding package)
  • Pre-treatment where needed

How we find the cause

  • Walls, doors and planting to protect
  • Type of block and its age
  • Moss, algae, weeds and oil staining
  • Whether the paving is permeable (no sand, no sealing with the wrong product)
  • Which sealer finish suits a slope or patio

What happens next

  1. Tell us about the job

    Use the form, the quote tool, WhatsApp or a call.

  2. We take a look

    A survey visit, or photos for smaller repair and cleaning jobs.

  3. Price in writing

    Every line itemised, including the dig, edging and drainage.

  4. Booked and built

    Agreed start date, then the work, the final clean-down and the joint top-up.

How we work

Edges set in concrete

Every edge restraint is bedded and haunched, so the paving cannot creep.

Clean finish

The site is swept, the joints are filled and you are shown how to look after the paving.

Itemised quotes

Break-out, waste, edging, drainage and covers are separate lines you can see.

The dig and sub-base in writing

Your quote states the depth of dig, the sub-base thickness and how it is compacted.

Cleaning in Brent: questions

How often should block paving in Brent be cleaned?

Every two to four years for most drives, more often for shaded or north-facing paving.

Can you seal my drive straight after cleaning?

Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.

How much does a block paving cleaning job cost in Brent?

Guide price for Brent: £3–£6 per m² including VAT, with a minimum charge for small areas.

Do you cover Harrow, Greenford and Acton?

Yes. We cover Brent and the places around it, including Harrow, Greenford and Acton, and the rest of Greater London.

Cleaning near Brent

Nearby towns we cover for cleaning, and cleaning across Greater London:

Other block paving services in Brent

Or see all block paving services in Brent.

Next step

Get a guide price in two minutes

Tell us what you have in mind for Brent, and we will put a written price together.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote