East Sussex · Cleaning

Block paving cleaning in Bexhill-on-Sea

We quote block paving cleaning and care across Bexhill-on-Sea and East Sussex, working from photos or a quick visit to give you a fixed price.

  • Postcodes TN40, TN39, TN33
  • £2.50–£5.50 per m² inc VAT
  • Free survey for new paving
Rotary surface cleaner cleaning a block paved drive, half clean and half stained

Block paving cleaning in Bexhill-on-Sea: what to expect

In Bexhill-on-Sea, many front gardens have already been paved once, so new paving often starts with breaking out the old surface.

Chalk, clay and sandy ground all occur across the South East, so the dig and sub-base depth are set on the survey rather than assumed.

How much does a block paving cleaning job cost in Bexhill-on-Sea?

Guide price in Bexhill-on-Sea£2.50–£5.50 per m²Including VAT at 20%

Guide price in Bexhill-on-Sea: £2.50–£5.50 per m² including VAT, which puts a 50 m² drive at about £135–£270. These are South East guide figures; the survey confirms the real price before you commit.

ItemGuide price inc VAT
Jet wash clean with a rotary cleaner£2.50–£5.50 per m²
Clean and re-sand£5.50–£11 per m²
Clean, re-sand and seal£8.50–£20 per m²
Sealing only£5.50–£16 per m²

Guide figures for the South East, checked 9 November 2026. See all prices or use the guide price tool.

What does a block paving cleaning job involve?

Block paving cleaning removes moss, algae, weeds and ground-in dirt from the surface and the joints, usually with a rotary surface cleaner on a pressure washer, which cleans evenly without the stripes a hand lance leaves. A biocide treatment can be applied to slow regrowth.

  • Rinse down of edges, steps and walls
  • Optional biocide and sealer
  • Weeds and moss removed from the joints
  • Kiln-dried sand brushed in once dry (re-sanding package)
  • Rotary surface clean at a pressure that will not blow out the joints

How we find the cause

  • Shade and drainage, which affect regrowth
  • How much joint sand is left
  • Whether any blocks are loose or sunken first
  • Whether the paving is permeable (no sand, no sealing with the wrong product)
  • Type of block and its age

What happens next

  1. Quick details

    Your postcode and the job. It takes a minute.

  2. On-site check

    Measurements, levels against the damp-proof course, ground and drainage.

  3. Itemised quote

    Fixed once the specification is agreed, with no vague extras.

  4. Laid and finished

    Compacted, jointed and handed back clean.

How we work

Clean finish

The site is swept, the joints are filled and you are shown how to look after the paving.

Edges set in concrete

Every edge restraint is bedded and haunched, so the paving cannot creep.

Itemised quotes

Break-out, waste, edging, drainage and covers are separate lines you can see.

Repair before replace

If your drive can be fixed or re-laid, we will say so.

Cleaning in Bexhill-on-Sea: questions

How often should block paving in Bexhill-on-Sea be cleaned?

Every two to four years for most drives, more often for shaded or north-facing paving.

Will cleaning damage my block paving?

Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.

Can you seal my drive straight after cleaning?

Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.

How much does a block paving cleaning job cost in Bexhill-on-Sea?

Guide price for Bexhill-on-Sea: £2.50–£5.50 per m² including VAT, with a minimum charge for small areas.

Cleaning near Bexhill-on-Sea

Nearby towns we cover for cleaning, and cleaning across East Sussex:

Other block paving services in Bexhill-on-Sea

Or see all block paving services in Bexhill-on-Sea.

Next step

Get a guide price in two minutes

Tell us what you have in mind for Bexhill-on-Sea, and we will put a written price together.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote