Scotland · Sunken paving

Sunken and rutted block paving in Perth and Kinross

Sunken and rutted block paving in Perth and Kinross: most dips and loose blocks are a base or edging problem, not a block problem, so that is what we fix.

  • 5 towns listed
  • £300–£1,200 inc VAT
  • Free survey for new paving
Older block paved driveway with a sunken dip and a puddle in the wheel track

How much does a sunken area repair cost in Perth and Kinross?

Guide price in Perth and Kinross£300–£1,200Including VAT at 20%

Guide price in Perth and Kinross: £300–£1,200 including VAT. These are Scotland guide figures; the survey or your photos confirm the real price before you commit.

ItemGuide price inc VAT
Sunken or rutted patch repaired£300–£1,200
Small repair (a few blocks or a short trench)£200–£650
Lift and re-lay on a sound base£35–£80 per m²
Lift and re-lay with sub-base rebuilt£60–£110 per m²

Guide figures for Scotland, checked 9 November 2026.

Towns we cover in Perth and Kinross

Choose a town for local prices and details for sunken paving:

What is included?

Sunken block paving is an area that has dropped below the surrounding surface, often as wheel ruts where cars turn, a dip near a manhole or drain, or a hollow where water sits after rain. The blocks themselves are usually fine; the problem is underneath.

Frost and heavy rain test paving in Scotland, so a well-drained sub-base and full joints matter as much as the blocks.

  • Sub-base dug out and rebuilt where it has failed
  • New laying course screeded to the correct level and falls
  • Blocks lifted, cleaned and stacked for re-use
  • Investigation of the cause (drain, sub-base, laying course, edging)
  • Same blocks relaid, re-jointed and compacted

How we find the cause

  • Trees, roots and past trenches
  • Replacement blocks or hidden blocks to swap in
  • Falls, so water does not collect again
  • How much of the area needs lifting to blend the repair
  • Whether a drain or gully is leaking under the paving

How it works

  1. Tell us about the job

    Use the form, the quote tool, WhatsApp or a call.

  2. We take a look

    A survey visit, or photos for smaller repair and cleaning jobs.

  3. Price in writing

    Every line itemised, including the dig, edging and drainage.

  4. Booked and built

    Agreed start date, then the work, the final clean-down and the joint top-up.

Sunken paving in Perth and Kinross: questions

How much does a sunken area repair cost in Perth and Kinross?

Our guide is £300–£1,200 including VAT. Small repairs are often priced from photos.

Can you send someone just to look?

For larger or unclear problems we visit; for small repairs, clear photos with a tape measure in shot are often enough to price it.

Can you repair block paving in Perth and Kinross without replacing it?

Usually, yes. We lift the affected blocks, fix the bed or base, and re-lay the same blocks so the repair matches.

Why does block paving sink?

Most dips come from a thin or poorly compacted sub-base, too much sand under the blocks, failed edging, or water washing material out from a broken drain.

Neighbouring areas

Next step

Get a guide price in two minutes

Answer four quick questions for an instant guide price, then book a free survey to fix it in writing. Repairs and cleaning can often be priced from photos.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote