England · Sunken paving

Sunken and rutted block paving in Oxfordshire

From the OX postcodes to Oxfordshire, we put tired block paving right without breaking out the whole drive.

  • 6 towns listed
  • £320–£1,300 inc VAT
  • Free survey for new paving
Older block paved driveway with a sunken dip and a puddle in the wheel track

How much does a sunken area repair cost in Oxfordshire?

Guide price in Oxfordshire£320–£1,300Including VAT at 20%

Most sunken area repair quotes in the South East fall within £320–£1,300 including VAT, with any extras listed separately on your quote.

ItemGuide price inc VAT
Sunken or rutted patch repaired£320–£1,300
Small repair (a few blocks or a short trench)£215–£700
Lift and re-lay on a sound base£40–£85 per m²
Lift and re-lay with sub-base rebuilt£65–£120 per m²

Guide figures for the South East, checked 9 November 2026.

Towns we cover in Oxfordshire

Choose a town for local prices and details for sunken paving:

What does a sunken area repair involve?

Sunken block paving is an area that has dropped below the surrounding surface, often as wheel ruts where cars turn, a dip near a manhole or drain, or a hollow where water sits after rain. The blocks themselves are usually fine; the problem is underneath.

Planning-sensitive towns and conservation areas are common in the South East, so we check the front-garden rules before quoting.

  • Sub-base dug out and rebuilt where it has failed
  • New laying course screeded to the correct level and falls
  • Investigation of the cause (drain, sub-base, laying course, edging)
  • Same blocks relaid, re-jointed and compacted
  • Blocks lifted, cleaned and stacked for re-use

How we find the cause

  • Trees, roots and past trenches
  • Condition and thickness of your existing blocks
  • Replacement blocks or hidden blocks to swap in
  • What caused the dip or movement: base, laying course, edging or drains
  • How much of the area needs lifting to blend the repair

How it works

  1. Send the basics

    Postcode, what you need and a rough size. Photos help.

  2. Survey

    We measure, check levels, ground and drainage, and talk through blocks and patterns.

  3. Written quote

    An itemised quote with the specification, the price and the start date.

  4. The work

    Our paving team builds it to the agreed specification and leaves the site swept.

Sunken paving in Oxfordshire: questions

Why does block paving sink?

Most dips come from a thin or poorly compacted sub-base, too much sand under the blocks, failed edging, or water washing material out from a broken drain.

Can you repair block paving in Oxfordshire without replacing it?

Usually, yes. We lift the affected blocks, fix the bed or base, and re-lay the same blocks so the repair matches.

How much does a sunken area repair cost in Oxfordshire?

Our guide is £320–£1,300 including VAT. Small repairs are often priced from photos.

Can you send someone just to look?

For larger or unclear problems we visit; for small repairs, clear photos with a tape measure in shot are often enough to price it.

Neighbouring areas

Next step

Get a guide price in two minutes

Answer four quick questions for an instant guide price, then book a free survey to fix it in writing. Repairs and cleaning can often be priced from photos.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote