Sunken and rutted block paving in Blyth: the local picture
Homes in Blyth include plenty of semis and detached houses with room for a drive, plus older terraces where parking is tighter.
Former colliery ground and clay soils occur across the North East, so the survey checks for soft spots before the sub-base depth is set.
How much does a sunken area repair cost in Blyth?
Guide price in Blyth: £270–£1,100 including VAT. These are North East guide figures; the survey or your photos confirm the real price before you commit.
| Item | Guide price inc VAT |
|---|---|
| Sunken or rutted patch repaired | £270–£1,100 |
| Small repair (a few blocks or a short trench) | £180–£590 |
| Lift and re-lay on a sound base | £30–£70 per m² |
| Lift and re-lay with sub-base rebuilt | £55–£100 per m² |
Guide figures for the North East, checked 9 November 2026. See all prices or use the guide price tool.
What does a sunken area repair involve?
Sunken block paving is an area that has dropped below the surrounding surface, often as wheel ruts where cars turn, a dip near a manhole or drain, or a hollow where water sits after rain. The blocks themselves are usually fine; the problem is underneath.
- New laying course screeded to the correct level and falls
- Same blocks relaid, re-jointed and compacted
- Blocks lifted, cleaned and stacked for re-use
- Sub-base dug out and rebuilt where it has failed
- Investigation of the cause (drain, sub-base, laying course, edging)
How we find the cause
- Whether the edging has moved or was never set in concrete
- How much of the area needs lifting to blend the repair
- What caused the dip or movement: base, laying course, edging or drains
- Falls, so water does not collect again
- Replacement blocks or hidden blocks to swap in
How it works
Tell us about the job
Use the form, the quote tool, WhatsApp or a call.
We take a look
A survey visit, or photos for smaller repair and cleaning jobs.
Price in writing
Every line itemised, including the dig, edging and drainage.
Booked and built
Agreed start date, then the work, the final clean-down and the joint top-up.
How we work
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Sunken paving in Blyth: questions
Can you send someone just to look?
For larger or unclear problems we visit; for small repairs, clear photos with a tape measure in shot are often enough to price it.
How much does a sunken area repair cost in Blyth?
Our guide is £270–£1,100 including VAT. Small repairs are often priced from photos.
Can you repair block paving in Blyth without replacing it?
Usually, yes. We lift the affected blocks, fix the bed or base, and re-lay the same blocks so the repair matches.
Why does block paving sink?
Most dips come from a thin or poorly compacted sub-base, too much sand under the blocks, failed edging, or water washing material out from a broken drain.
Sunken paving near Blyth
Nearby towns we cover for sunken paving, and sunken paving across Northumberland:
- Sunken paving in Bedlington
- Sunken paving in Ashington
- Sunken paving in Cramlington
- Sunken paving in Morpeth
- Sunken paving in Ponteland
