Greater Manchester · Sunken paving

Sunken and rutted block paving in Failsworth

Block paving in Failsworth sinking, rocking or broken? Our sunken and rutted block paving service finds the cause first, then lifts and relays the blocks so the repair lasts.

  • Postcodes M35, M40
  • £300–£1,200 inc VAT
  • Free survey for new paving
Older block paved driveway with a sunken dip and a puddle in the wheel track

Planning a sunken area repair in Failsworth

Failsworth is a smaller town, and many of its homes have more frontage to work with than city houses, which leaves room for borders and planting.

Terraced streets across the North West often have very short frontages, so we check parking depth before quoting a conversion.

How much does a sunken area repair cost in Failsworth?

Guide price in Failsworth£300–£1,200Including VAT at 20%

Most sunken area repair quotes in the North West fall within £300–£1,200 including VAT, with any extras listed separately on your quote.

ItemGuide price inc VAT
Sunken or rutted patch repaired£300–£1,200
Small repair (a few blocks or a short trench)£200–£650
Lift and re-lay on a sound base£35–£80 per m²
Lift and re-lay with sub-base rebuilt£60–£110 per m²

Guide figures for the North West, checked 9 November 2026. See all prices or use the guide price tool.

What you get with our sunken paving service

Sunken block paving is an area that has dropped below the surrounding surface, often as wheel ruts where cars turn, a dip near a manhole or drain, or a hollow where water sits after rain. The blocks themselves are usually fine; the problem is underneath.

  • Blocks lifted, cleaned and stacked for re-use
  • New laying course screeded to the correct level and falls
  • Investigation of the cause (drain, sub-base, laying course, edging)
  • Same blocks relaid, re-jointed and compacted
  • Sub-base dug out and rebuilt where it has failed

How we find the cause

  • Trees, roots and past trenches
  • Whether the edging has moved or was never set in concrete
  • Condition and thickness of your existing blocks
  • How much of the area needs lifting to blend the repair
  • Falls, so water does not collect again

How it works

  1. Quick details

    Your postcode and the job. It takes a minute.

  2. On-site check

    Measurements, levels against the damp-proof course, ground and drainage.

  3. Itemised quote

    Fixed once the specification is agreed, with no vague extras.

  4. Laid and finished

    Compacted, jointed and handed back clean.

How we work

Repair before replace

If your drive can be fixed or re-laid, we will say so.

Honest timescales

We tell you how long the job takes and what can delay it, such as approvals and weather.

Edges set in concrete

Every edge restraint is bedded and haunched, so the paving cannot creep.

Itemised quotes

Break-out, waste, edging, drainage and covers are separate lines you can see.

Sunken paving in Failsworth: questions

Why does block paving sink?

Most dips come from a thin or poorly compacted sub-base, too much sand under the blocks, failed edging, or water washing material out from a broken drain.

Can you send someone just to look?

For larger or unclear problems we visit; for small repairs, clear photos with a tape measure in shot are often enough to price it.

Can you repair block paving in Failsworth without replacing it?

Usually, yes. We lift the affected blocks, fix the bed or base, and re-lay the same blocks so the repair matches.

How much does a sunken area repair cost in Failsworth?

Our guide is £300–£1,200 including VAT. Small repairs are often priced from photos.

Sunken paving near Failsworth

Nearby towns we cover for sunken paving, and sunken paving across Greater Manchester:

Other block paving services in Failsworth

Or see all block paving services in Failsworth.

Next step

Get a guide price in two minutes

Tell us what you have in mind for Failsworth, and we will put a written price together.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote