Planning a sunken area repair in Bolton
Across Bolton, front gardens range from narrow terrace plots to broad modern drives, and the best block, pattern and drainage choice changes with them.
Terraced streets across the North West often have very short frontages, so we check parking depth before quoting a conversion.
How much does a sunken area repair cost in Bolton?
Most sunken area repair quotes in the North West fall within £300–£1,200 including VAT, with any extras listed separately on your quote.
| Item | Guide price inc VAT |
|---|---|
| Sunken or rutted patch repaired | £300–£1,200 |
| Small repair (a few blocks or a short trench) | £200–£650 |
| Lift and re-lay on a sound base | £35–£80 per m² |
| Lift and re-lay with sub-base rebuilt | £60–£110 per m² |
Guide figures for the North West, checked 9 November 2026. See all prices or use the guide price tool.
What is included?
Common causes are a sub-base that was too thin or not compacted, a laying course that was too thick, water washing sand out through a broken drain, or a trench that was never properly filled. Re-levelling means lifting the blocks in and around the dip, finding and fixing the cause, rebuilding and compacting the layers, and relaying the same blocks so they match.
- Blocks lifted, cleaned and stacked for re-use
- New laying course screeded to the correct level and falls
- Investigation of the cause (drain, sub-base, laying course, edging)
- Sub-base dug out and rebuilt where it has failed
- Same blocks relaid, re-jointed and compacted
What we look at first in Bolton
- Trees, roots and past trenches
- Whether a drain or gully is leaking under the paving
- Condition and thickness of your existing blocks
- How much of the area needs lifting to blend the repair
- What caused the dip or movement: base, laying course, edging or drains
How it works
Tell us about the job
Use the form, the quote tool, WhatsApp or a call.
We take a look
A survey visit, or photos for smaller repair and cleaning jobs.
Price in writing
Every line itemised, including the dig, edging and drainage.
Booked and built
Agreed start date, then the work, the final clean-down and the joint top-up.
How we work
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
Sunken paving in Bolton: questions
Can you send someone just to look?
For larger or unclear problems we visit; for small repairs, clear photos with a tape measure in shot are often enough to price it.
Why does block paving sink?
Most dips come from a thin or poorly compacted sub-base, too much sand under the blocks, failed edging, or water washing material out from a broken drain.
Do you cover Farnworth, Westhoughton and Radcliffe?
Yes. We cover Bolton and the places around it, including Farnworth, Westhoughton and Radcliffe, and the rest of Greater Manchester.
How much does a sunken area repair cost in Bolton?
Our guide is £300–£1,200 including VAT. Small repairs are often priced from photos.
Sunken paving near Bolton
Nearby towns we cover for sunken paving, and sunken paving across Greater Manchester:
- Sunken paving in Farnworth
- Sunken paving in Westhoughton
- Sunken paving in Radcliffe
- Sunken paving in Atherton
- Sunken paving in Walkden
- Sunken paving in Tyldesley
