Sunken and rutted block paving in Clacton-on-Sea: what to expect
In Clacton-on-Sea, many front gardens have already been paved once, so new paving often starts with breaking out the old surface.
Flat ground across much of the East means falls have to be built in carefully so water does not sit on the drive.
How much does a sunken area repair cost in Clacton-on-Sea?
Most sunken area repair quotes in the East of England fall within £320–£1,250 including VAT, with any extras listed separately on your quote.
| Item | Guide price inc VAT |
|---|---|
| Sunken or rutted patch repaired | £320–£1,250 |
| Small repair (a few blocks or a short trench) | £210–£680 |
| Lift and re-lay on a sound base | £35–£85 per m² |
| Lift and re-lay with sub-base rebuilt | £65–£115 per m² |
Guide figures for the East of England, checked 9 November 2026. See all prices or use the guide price tool.
What you get with our sunken paving service
Common causes are a sub-base that was too thin or not compacted, a laying course that was too thick, water washing sand out through a broken drain, or a trench that was never properly filled. Re-levelling means lifting the blocks in and around the dip, finding and fixing the cause, rebuilding and compacting the layers, and relaying the same blocks so they match.
- Sub-base dug out and rebuilt where it has failed
- New laying course screeded to the correct level and falls
- Investigation of the cause (drain, sub-base, laying course, edging)
- Same blocks relaid, re-jointed and compacted
- Blocks lifted, cleaned and stacked for re-use
How we find the cause
- Whether the edging has moved or was never set in concrete
- Condition and thickness of your existing blocks
- Falls, so water does not collect again
- What caused the dip or movement: base, laying course, edging or drains
- Whether a drain or gully is leaking under the paving
How it works
Tell us about the job
Use the form, the quote tool, WhatsApp or a call.
We take a look
A survey visit, or photos for smaller repair and cleaning jobs.
Price in writing
Every line itemised, including the dig, edging and drainage.
Booked and built
Agreed start date, then the work, the final clean-down and the joint top-up.
Why choose Block Paving Contractors
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
Sunken paving in Clacton-on-Sea: questions
Do you cover Harwich, Colchester and Maldon?
Yes. We cover Clacton-on-Sea and the places around it, including Harwich, Colchester and Maldon, and the rest of Essex.
Can you send someone just to look?
For larger or unclear problems we visit; for small repairs, clear photos with a tape measure in shot are often enough to price it.
Why does block paving sink?
Most dips come from a thin or poorly compacted sub-base, too much sand under the blocks, failed edging, or water washing material out from a broken drain.
How much does a sunken area repair cost in Clacton-on-Sea?
Our guide is £320–£1,250 including VAT. Small repairs are often priced from photos.
Sunken paving near Clacton-on-Sea
Nearby towns we cover for sunken paving, and sunken paving across Essex:
