England · Sunken paving

Sunken and rutted block paving in Derbyshire

If your drive or patio in Derbyshire has dips, ruts or broken blocks, we can usually re-use your own blocks so the repair matches.

  • 12 towns listed
  • £300–£1,200 inc VAT
  • Free survey for new paving
Older block paved driveway with a sunken dip and a puddle in the wheel track

How much does a sunken area repair cost in Derbyshire?

Guide price in Derbyshire£300–£1,200Including VAT at 20%

In the East Midlands, a sunken area repair usually costs £300–£1,200 including VAT. Your exact price depends on what the survey or your photos show, and is fixed in writing before anything is booked.

ItemGuide price inc VAT
Sunken or rutted patch repaired£300–£1,200
Small repair (a few blocks or a short trench)£200–£650
Lift and re-lay on a sound base£35–£80 per m²
Lift and re-lay with sub-base rebuilt£60–£110 per m²

Guide figures for the East Midlands, checked 9 November 2026.

Towns we cover in Derbyshire

Choose a town for local prices and details for sunken paving:

What is included?

Common causes are a sub-base that was too thin or not compacted, a laying course that was too thick, water washing sand out through a broken drain, or a trench that was never properly filled. Re-levelling means lifting the blocks in and around the dip, finding and fixing the cause, rebuilding and compacting the layers, and relaying the same blocks so they match.

Block drives laid twenty or thirty years ago are often ready for re-laying rather than replacing, because sound blocks outlast a weak base.

  • Sub-base dug out and rebuilt where it has failed
  • Investigation of the cause (drain, sub-base, laying course, edging)
  • Blocks lifted, cleaned and stacked for re-use
  • Same blocks relaid, re-jointed and compacted
  • New laying course screeded to the correct level and falls

How we find the cause

  • Trees, roots and past trenches
  • Condition and thickness of your existing blocks
  • Falls, so water does not collect again
  • Whether the edging has moved or was never set in concrete
  • Whether a drain or gully is leaking under the paving

How it works

  1. Send the basics

    Postcode, what you need and a rough size. Photos help.

  2. Survey

    We measure, check levels, ground and drainage, and talk through blocks and patterns.

  3. Written quote

    An itemised quote with the specification, the price and the start date.

  4. The work

    Our paving team builds it to the agreed specification and leaves the site swept.

Sunken paving in Derbyshire: questions

Why does block paving sink?

Most dips come from a thin or poorly compacted sub-base, too much sand under the blocks, failed edging, or water washing material out from a broken drain.

Can you send someone just to look?

For larger or unclear problems we visit; for small repairs, clear photos with a tape measure in shot are often enough to price it.

Can you repair block paving in Derbyshire without replacing it?

Usually, yes. We lift the affected blocks, fix the bed or base, and re-lay the same blocks so the repair matches.

How much does a sunken area repair cost in Derbyshire?

Our guide is £300–£1,200 including VAT. Small repairs are often priced from photos.

Neighbouring areas

Next step

Get a guide price in two minutes

Answer four quick questions for an instant guide price, then book a free survey to fix it in writing. Repairs and cleaning can often be priced from photos.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote