Sunken and rutted block paving in Seaham: what to expect
Around Seaham, plots are often larger and drives longer, so edging, falls and the route the water takes need planning.
Wind-driven rain on the North East coast makes falls and a well-filled joint more important.
How much does a sunken area repair cost in Seaham?
Guide price in Seaham: £270–£1,100 including VAT. These are North East guide figures; the survey or your photos confirm the real price before you commit.
| Item | Guide price inc VAT |
|---|---|
| Sunken or rutted patch repaired | £270–£1,100 |
| Small repair (a few blocks or a short trench) | £180–£590 |
| Lift and re-lay on a sound base | £30–£70 per m² |
| Lift and re-lay with sub-base rebuilt | £55–£100 per m² |
Guide figures for the North East, checked 9 November 2026. See all prices or use the guide price tool.
What does a sunken area repair involve?
Sunken block paving is an area that has dropped below the surrounding surface, often as wheel ruts where cars turn, a dip near a manhole or drain, or a hollow where water sits after rain. The blocks themselves are usually fine; the problem is underneath.
- Sub-base dug out and rebuilt where it has failed
- New laying course screeded to the correct level and falls
- Investigation of the cause (drain, sub-base, laying course, edging)
- Blocks lifted, cleaned and stacked for re-use
- Same blocks relaid, re-jointed and compacted
How we find the cause
- What caused the dip or movement: base, laying course, edging or drains
- Whether a drain or gully is leaking under the paving
- Trees, roots and past trenches
- Whether the edging has moved or was never set in concrete
- Falls, so water does not collect again
What happens next
Send the basics
Postcode, what you need and a rough size. Photos help.
Survey
We measure, check levels, ground and drainage, and talk through blocks and patterns.
Written quote
An itemised quote with the specification, the price and the start date.
The work
Our paving team builds it to the agreed specification and leaves the site swept.
How we work
Repair before replace
If your drive can be fixed or re-laid, we will say so.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
Sunken paving in Seaham: questions
How much does a sunken area repair cost in Seaham?
Our guide is £270–£1,100 including VAT. Small repairs are often priced from photos.
Can you repair block paving in Seaham without replacing it?
Usually, yes. We lift the affected blocks, fix the bed or base, and re-lay the same blocks so the repair matches.
Why does block paving sink?
Most dips come from a thin or poorly compacted sub-base, too much sand under the blocks, failed edging, or water washing material out from a broken drain.
Can you send someone just to look?
For larger or unclear problems we visit; for small repairs, clear photos with a tape measure in shot are often enough to price it.
Sunken paving near Seaham
Nearby towns we cover for sunken paving, and sunken paving across County Durham:
- Sunken paving in Peterlee
- Sunken paving in Chester-le-Street
- Sunken paving in Durham
- Sunken paving in Hartlepool
- Sunken paving in Stanley
- Sunken paving in Billingham
