England · Re-sanding

Re-sanding and re-jointing in South Yorkshire

Re-sanding and re-jointing in South Yorkshire: done properly, it lifts years of moss and grime and leaves the joints full and tight.

  • 6 towns listed
  • £2.50–£9 per m² inc VAT
  • Free survey for new paving
Broom brushing kiln-dried sand into the joints of charcoal block paving

How much does a re-sanding job cost in South Yorkshire?

Guide price in South Yorkshire£2.50–£9 per m²Including VAT at 20%

In Yorkshire and the Humber, a re-sanding job usually costs £2.50–£9 per m² including VAT. For a 50 m² drive, that is roughly £180–£450. Your exact price depends on what the survey or your photos show, and is fixed in writing before anything is booked.

ItemGuide price inc VAT
Re-sanding / re-jointing (standalone)£2.50–£9 per m²
Jet wash clean with a rotary cleaner£2.50–£4.50 per m²
Clean and re-sand£4.50–£9 per m²
Clean, re-sand and seal£7–£18 per m²
Sealing only£4.50–£14 per m²

Guide figures for Yorkshire and the Humber, checked 9 November 2026.

Towns we cover in South Yorkshire

We quote re-sanding in every town across South Yorkshire, including:

What is included?

Re-sanding is refilling the joints between blocks with fine, dry jointing sand, usually kiln-dried, and working it down with a brush and a plate compactor fitted with a protective pad. The sand in the joints is what makes blocks lock together; when it washes or sweeps out, the blocks can move, rattle and let weeds in.

Yorkshire has everything from stone-built terraces to large new estates, so block choice often follows the house: clay or tumbled blocks for older homes, crisp concrete for newer ones.

  • Kiln-dried sand brushed into every joint
  • Surface swept and dried
  • Second top-up and surplus swept off
  • Plate compactor with a rubber pad to settle the sand

How we find the cause

  • Walls, doors and planting to protect
  • Which sealer finish suits a slope or patio
  • Shade and drainage, which affect regrowth
  • Whether any blocks are loose or sunken first
  • Type of block and its age

How it works

  1. Quick details

    Your postcode and the job. It takes a minute.

  2. On-site check

    Measurements, levels against the damp-proof course, ground and drainage.

  3. Itemised quote

    Fixed once the specification is agreed, with no vague extras.

  4. Laid and finished

    Compacted, jointed and handed back clean.

Re-sanding in South Yorkshire: questions

Do you cover Sheffield, Rotherham and Doncaster?

Yes. We cover all of South Yorkshire, including Sheffield, Rotherham and Doncaster.

Will cleaning damage my block paving?

Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.

How often should block paving in South Yorkshire be cleaned?

Every two to four years for most drives, more often for shaded or north-facing paving.

How much does a re-sanding job cost in South Yorkshire?

Guide price for South Yorkshire: £2.50–£9 per m² including VAT, with a minimum charge for small areas.

Neighbouring areas

Next step

Get a guide price in two minutes

Answer four quick questions for an instant guide price, then book a free survey to fix it in writing. Repairs and cleaning can often be priced from photos.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote