England · Re-sanding

Re-sanding and re-jointing in Shropshire

Green, weedy or faded block paving in Shropshire? Our re-sanding and re-jointing service brings it back without blasting the joints out, then puts the sand back.

  • 6 towns listed
  • £3–£10 per m² inc VAT
  • Free survey for new paving
Broom brushing kiln-dried sand into the joints of charcoal block paving

How much does a re-sanding job cost in Shropshire?

Guide price in Shropshire£3–£10 per m²Including VAT at 20%

Most re-sanding job quotes in the West Midlands fall within £3–£10 per m² including VAT. A 50 m² drive would usually be about £200–£500, with any extras listed separately on your quote.

ItemGuide price inc VAT
Re-sanding / re-jointing (standalone)£3–£10 per m²
Jet wash clean with a rotary cleaner£2.50–£5 per m²
Clean and re-sand£5–£10 per m²
Clean, re-sand and seal£8–£20 per m²
Sealing only£5–£15 per m²

Guide figures for the West Midlands, checked 9 November 2026.

Towns we cover in Shropshire

We quote re-sanding in every town across Shropshire, including:

What does a re-sanding job involve?

Joints empty naturally over time, and especially after pressure washing. Re-sanding on its own is a quick job on a clean, dry surface; on dirty paving it follows a clean.

Clay ground is widespread in the West Midlands, so the sub-base depth and drainage are checked on every survey.

  • Kiln-dried sand brushed into every joint
  • Plate compactor with a rubber pad to settle the sand
  • Second top-up and surplus swept off
  • Surface swept and dried

How we find the cause

  • Whether the paving is permeable (no sand, no sealing with the wrong product)
  • Shade and drainage, which affect regrowth
  • Type of block and its age
  • Moss, algae, weeds and oil staining
  • How much joint sand is left

How it works

  1. Send the basics

    Postcode, what you need and a rough size. Photos help.

  2. Survey

    We measure, check levels, ground and drainage, and talk through blocks and patterns.

  3. Written quote

    An itemised quote with the specification, the price and the start date.

  4. The work

    Our paving team builds it to the agreed specification and leaves the site swept.

Re-sanding in Shropshire: questions

Will cleaning damage my block paving?

Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.

How much does a re-sanding job cost in Shropshire?

Guide price for Shropshire: £3–£10 per m² including VAT, with a minimum charge for small areas.

Do you cover Telford, Shrewsbury and Wellington?

Yes. We cover all of Shropshire, including Telford, Shrewsbury and Wellington.

How often should block paving in Shropshire be cleaned?

Every two to four years for most drives, more often for shaded or north-facing paving.

Neighbouring areas

Next step

Get a guide price in two minutes

Answer four quick questions for an instant guide price, then book a free survey to fix it in writing. Repairs and cleaning can often be priced from photos.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote