Wales · Re-sanding

Re-sanding and re-jointing in Powys

We quote block paving cleaning and care across Powys and Powys, working from photos or a quick visit to give you a fixed price.

  • 4 towns listed
  • £3–£9.50 per m² inc VAT
  • Free survey for new paving
Broom brushing kiln-dried sand into the joints of charcoal block paving

How much does a re-sanding job cost in Powys?

Guide price in Powys£3–£9.50 per m²Including VAT at 20%

Most re-sanding job quotes in Wales fall within £3–£9.50 per m² including VAT. A 50 m² drive would usually be about £185–£470, with any extras listed separately on your quote.

ItemGuide price inc VAT
Re-sanding / re-jointing (standalone)£3–£9.50 per m²
Jet wash clean with a rotary cleaner£2.50–£4.50 per m²
Clean and re-sand£4.50–£9.50 per m²
Clean, re-sand and seal£7.50–£19 per m²
Sealing only£4.50–£14 per m²

Guide figures for Wales, checked 9 November 2026.

Towns we cover in Powys

We quote re-sanding in every town across Powys, including:

What does a re-sanding job involve?

Joints empty naturally over time, and especially after pressure washing. Re-sanding on its own is a quick job on a clean, dry surface; on dirty paving it follows a clean.

Wales is wetter than most of England, and new front paving has to be permeable or drain within the property, so drainage is designed in from the start.

  • Surface swept and dried
  • Plate compactor with a rubber pad to settle the sand
  • Kiln-dried sand brushed into every joint
  • Second top-up and surplus swept off

How we find the cause

  • Whether any blocks are loose or sunken first
  • Type of block and its age
  • Shade and drainage, which affect regrowth
  • Walls, doors and planting to protect
  • Which sealer finish suits a slope or patio

How it works

  1. Quick details

    Your postcode and the job. It takes a minute.

  2. On-site check

    Measurements, levels against the damp-proof course, ground and drainage.

  3. Itemised quote

    Fixed once the specification is agreed, with no vague extras.

  4. Laid and finished

    Compacted, jointed and handed back clean.

Re-sanding in Powys: questions

How much does a re-sanding job cost in Powys?

Guide price for Powys: £3–£9.50 per m² including VAT, with a minimum charge for small areas.

Will cleaning damage my block paving?

Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.

How often should block paving in Powys be cleaned?

Every two to four years for most drives, more often for shaded or north-facing paving.

Can you seal my drive straight after cleaning?

Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.

Neighbouring areas

Next step

Get a guide price in two minutes

Answer four quick questions for an instant guide price, then book a free survey to fix it in writing. Repairs and cleaning can often be priced from photos.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote