How much does a re-sanding job cost in Oxfordshire?
Expect re-sanding jobs in Oxfordshire to come in at around £3–£11 per m², including VAT at 20%. As an example, a 50 m² drive usually comes to between £215 and £540.
| Item | Guide price inc VAT |
|---|---|
| Re-sanding / re-jointing (standalone) | £3–£11 per m² |
| Jet wash clean with a rotary cleaner | £2.50–£5.50 per m² |
| Clean and re-sand | £5.50–£11 per m² |
| Clean, re-sand and seal | £8.50–£20 per m² |
| Sealing only | £5.50–£16 per m² |
Guide figures for the South East, checked 9 November 2026.
Towns we cover in Oxfordshire
We quote re-sanding in every town across Oxfordshire, including:
What does a re-sanding job involve?
Joints empty naturally over time, and especially after pressure washing. Re-sanding on its own is a quick job on a clean, dry surface; on dirty paving it follows a clean.
Chalk, clay and sandy ground all occur across the South East, so the dig and sub-base depth are set on the survey rather than assumed.
- Plate compactor with a rubber pad to settle the sand
- Second top-up and surplus swept off
- Surface swept and dried
- Kiln-dried sand brushed into every joint
How we find the cause
- Shade and drainage, which affect regrowth
- Which sealer finish suits a slope or patio
- Whether any blocks are loose or sunken first
- Whether the paving is permeable (no sand, no sealing with the wrong product)
- Walls, doors and planting to protect
How it works
Tell us about the job
Use the form, the quote tool, WhatsApp or a call.
We take a look
A survey visit, or photos for smaller repair and cleaning jobs.
Price in writing
Every line itemised, including the dig, edging and drainage.
Booked and built
Agreed start date, then the work, the final clean-down and the joint top-up.
Re-sanding in Oxfordshire: questions
Do you cover Oxford, Banbury and Abingdon?
Yes. We cover all of Oxfordshire, including Oxford, Banbury and Abingdon.
How much does a re-sanding job cost in Oxfordshire?
Guide price for Oxfordshire: £3–£11 per m² including VAT, with a minimum charge for small areas.
Can you seal my drive straight after cleaning?
Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.
Will cleaning damage my block paving?
Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.
