England · Re-sanding

Re-sanding and re-jointing in Northumberland

Re-sanding and re-jointing in Northumberland: done properly, it lifts years of moss and grime and leaves the joints full and tight.

  • 6 towns listed
  • £2.50–£9 per m² inc VAT
  • Free survey for new paving
Broom brushing kiln-dried sand into the joints of charcoal block paving

How much does a re-sanding job cost in Northumberland?

Guide price in Northumberland£2.50–£9 per m²Including VAT at 20%

Guide price in Northumberland: £2.50–£9 per m² including VAT, which puts a 50 m² drive at about £180–£450. These are North East guide figures; the survey confirms the real price before you commit.

ItemGuide price inc VAT
Re-sanding / re-jointing (standalone)£2.50–£9 per m²
Jet wash clean with a rotary cleaner£2.50–£4.50 per m²
Clean and re-sand£4.50–£9 per m²
Clean, re-sand and seal£7–£18 per m²
Sealing only£4.50–£14 per m²

Guide figures for the North East, checked 9 November 2026.

Towns we cover in Northumberland

We quote re-sanding in every town across Northumberland, including:

What does a re-sanding job involve?

Re-sanding is refilling the joints between blocks with fine, dry jointing sand, usually kiln-dried, and working it down with a brush and a plate compactor fitted with a protective pad. The sand in the joints is what makes blocks lock together; when it washes or sweeps out, the blocks can move, rattle and let weeds in.

Former colliery ground and clay soils occur across the North East, so the survey checks for soft spots before the sub-base depth is set.

  • Surface swept and dried
  • Kiln-dried sand brushed into every joint
  • Plate compactor with a rubber pad to settle the sand
  • Second top-up and surplus swept off

How we find the cause

  • Walls, doors and planting to protect
  • Whether the paving is permeable (no sand, no sealing with the wrong product)
  • How much joint sand is left
  • Shade and drainage, which affect regrowth
  • Moss, algae, weeds and oil staining

How it works

  1. Tell us about the job

    Use the form, the quote tool, WhatsApp or a call.

  2. We take a look

    A survey visit, or photos for smaller repair and cleaning jobs.

  3. Price in writing

    Every line itemised, including the dig, edging and drainage.

  4. Booked and built

    Agreed start date, then the work, the final clean-down and the joint top-up.

Re-sanding in Northumberland: questions

How often should block paving in Northumberland be cleaned?

Every two to four years for most drives, more often for shaded or north-facing paving.

How much does a re-sanding job cost in Northumberland?

Guide price for Northumberland: £2.50–£9 per m² including VAT, with a minimum charge for small areas.

Do you cover Blyth, Cramlington and Ashington?

Yes. We cover all of Northumberland, including Blyth, Cramlington and Ashington.

Will cleaning damage my block paving?

Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.

Neighbouring areas

Next step

Get a guide price in two minutes

Answer four quick questions for an instant guide price, then book a free survey to fix it in writing. Repairs and cleaning can often be priced from photos.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote