How much does a re-sanding job cost in Merseyside?
For Merseyside, our guide is £3–£10 per m² including VAT, so a 50 m² drive is likely to be £200–£500. Smaller jobs cost more per square metre because set-up and waste costs do not shrink with the area.
| Item | Guide price inc VAT |
|---|---|
| Re-sanding / re-jointing (standalone) | £3–£10 per m² |
| Jet wash clean with a rotary cleaner | £2.50–£5 per m² |
| Clean and re-sand | £5–£10 per m² |
| Clean, re-sand and seal | £8–£20 per m² |
| Sealing only | £5–£15 per m² |
Guide figures for the North West, checked 9 November 2026.
Towns we cover in Merseyside
We quote re-sanding in every town across Merseyside, including:
- Liverpool
- Birkenhead
- St Helens
- Southport
- Wallasey
- Bootle
- Bebington
- Huyton
- Kirkby
- Prescot
- Heswall
- Maghull
- Golborne
- Formby
- Garston
- Speke
- Halewood
What does a re-sanding job involve?
Joints empty naturally over time, and especially after pressure washing. Re-sanding on its own is a quick job on a clean, dry surface; on dirty paving it follows a clean.
Terraced streets across the North West often have very short frontages, so we check parking depth before quoting a conversion.
- Plate compactor with a rubber pad to settle the sand
- Kiln-dried sand brushed into every joint
- Second top-up and surplus swept off
- Surface swept and dried
How we find the cause
- Moss, algae, weeds and oil staining
- How much joint sand is left
- Walls, doors and planting to protect
- Which sealer finish suits a slope or patio
- Whether any blocks are loose or sunken first
How it works
Quick details
Your postcode and the job. It takes a minute.
On-site check
Measurements, levels against the damp-proof course, ground and drainage.
Itemised quote
Fixed once the specification is agreed, with no vague extras.
Laid and finished
Compacted, jointed and handed back clean.
Re-sanding in Merseyside: questions
How much does a re-sanding job cost in Merseyside?
Guide price for Merseyside: £3–£10 per m² including VAT, with a minimum charge for small areas.
Will cleaning damage my block paving?
Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.
How often should block paving in Merseyside be cleaned?
Every two to four years for most drives, more often for shaded or north-facing paving.
Do you cover Liverpool, Birkenhead and St Helens?
Yes. We cover all of Merseyside, including Liverpool, Birkenhead and St Helens.
