Scotland · Re-sanding

Re-sanding and re-jointing in Highlands

We quote block paving cleaning and care across Highlands and the Highlands, working from photos or a quick visit to give you a fixed price.

  • 6 towns listed
  • £3–£10 per m² inc VAT
  • By arrangement
Broom brushing kiln-dried sand into the joints of charcoal block paving

How much does a re-sanding job cost in Highlands?

Guide price in Highlands£3–£10 per m²Including VAT at 20%

Expect re-sanding jobs in Highlands to come in at around £3–£10 per m², including VAT at 20%. As an example, a 50 m² drive usually comes to between £200 and £500.

ItemGuide price inc VAT
Re-sanding / re-jointing (standalone)£3–£10 per m²
Jet wash clean with a rotary cleaner£2.50–£5 per m²
Clean and re-sand£5–£10 per m²
Clean, re-sand and seal£8–£20 per m²
Sealing only£5–£15 per m²

Guide figures for Scotland, checked 9 November 2026.

Towns we cover in Highlands

We quote re-sanding in every town across the Highlands, including:

What is included?

Joints empty naturally over time, and especially after pressure washing. Re-sanding on its own is a quick job on a clean, dry surface; on dirty paving it follows a clean.

Frost and heavy rain test paving in Scotland, so a well-drained sub-base and full joints matter as much as the blocks.

  • Second top-up and surplus swept off
  • Kiln-dried sand brushed into every joint
  • Surface swept and dried
  • Plate compactor with a rubber pad to settle the sand

How we find the cause

  • Type of block and its age
  • Which sealer finish suits a slope or patio
  • Whether the paving is permeable (no sand, no sealing with the wrong product)
  • Whether any blocks are loose or sunken first
  • Moss, algae, weeds and oil staining

How it works

  1. Quick details

    Your postcode and the job. It takes a minute.

  2. On-site check

    Measurements, levels against the damp-proof course, ground and drainage.

  3. Itemised quote

    Fixed once the specification is agreed, with no vague extras.

  4. Laid and finished

    Compacted, jointed and handed back clean.

Re-sanding in Highlands: questions

Do you cover Inverness, Fort William and Nairn?

Yes. We cover all of the Highlands, including Inverness, Fort William and Nairn.

Can you seal my drive straight after cleaning?

Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.

Will cleaning damage my block paving?

Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.

How much does a re-sanding job cost in Highlands?

Guide price for Highlands: £3–£10 per m² including VAT, with a minimum charge for small areas.

Neighbouring areas

Next step

Get a guide price in two minutes

Answer four quick questions for an instant guide price, then send it to us for a price from photos or a survey by arrangement. Repairs and cleaning can often be priced from photos.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote