England · Re-sanding

Re-sanding and re-jointing in Herefordshire

Green, weedy or faded block paving in Herefordshire? Our re-sanding and re-jointing service brings it back without blasting the joints out, then puts the sand back.

  • 4 towns listed
  • £3–£10 per m² inc VAT
  • Free survey for new paving
Broom brushing kiln-dried sand into the joints of charcoal block paving

How much does a re-sanding job cost in Herefordshire?

Guide price in Herefordshire£3–£10 per m²Including VAT at 20%

In the West Midlands, a re-sanding job usually costs £3–£10 per m² including VAT. For a 50 m² drive, that is roughly £200–£500. Your exact price depends on what the survey or your photos show, and is fixed in writing before anything is booked.

ItemGuide price inc VAT
Re-sanding / re-jointing (standalone)£3–£10 per m²
Jet wash clean with a rotary cleaner£2.50–£5 per m²
Clean and re-sand£5–£10 per m²
Clean, re-sand and seal£8–£20 per m²
Sealing only£5–£15 per m²

Guide figures for the West Midlands, checked 9 November 2026.

Towns we cover in Herefordshire

We quote re-sanding in every town across Herefordshire, including:

What is included?

Joints empty naturally over time, and especially after pressure washing. Re-sanding on its own is a quick job on a clean, dry surface; on dirty paving it follows a clean.

Clay ground is widespread in the West Midlands, so the sub-base depth and drainage are checked on every survey.

  • Second top-up and surplus swept off
  • Kiln-dried sand brushed into every joint
  • Plate compactor with a rubber pad to settle the sand
  • Surface swept and dried

How we find the cause

  • Which sealer finish suits a slope or patio
  • How much joint sand is left
  • Walls, doors and planting to protect
  • Whether the paving is permeable (no sand, no sealing with the wrong product)
  • Moss, algae, weeds and oil staining

How it works

  1. Quick details

    Your postcode and the job. It takes a minute.

  2. On-site check

    Measurements, levels against the damp-proof course, ground and drainage.

  3. Itemised quote

    Fixed once the specification is agreed, with no vague extras.

  4. Laid and finished

    Compacted, jointed and handed back clean.

Re-sanding in Herefordshire: questions

Will cleaning damage my block paving?

Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.

Can you seal my drive straight after cleaning?

Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.

How much does a re-sanding job cost in Herefordshire?

Guide price for Herefordshire: £3–£10 per m² including VAT, with a minimum charge for small areas.

How often should block paving in Herefordshire be cleaned?

Every two to four years for most drives, more often for shaded or north-facing paving.

Neighbouring areas

Next step

Get a guide price in two minutes

Answer four quick questions for an instant guide price, then book a free survey to fix it in writing. Repairs and cleaning can often be priced from photos.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote