Scotland · Re-sanding

Re-sanding and re-jointing in Edinburgh and the Lothians

We clean, re-sand and seal block paving across Edinburgh and the Lothians (EH1, EH6, EH7, EH8), using a rotary cleaner at a pressure that will not damage the blocks.

  • 14 towns listed
  • £3–£10 per m² inc VAT
  • Free survey for new paving
Broom brushing kiln-dried sand into the joints of charcoal block paving

How much does a re-sanding job cost in Edinburgh and the Lothians?

Guide price in Edinburgh and the Lothians£3–£10 per m²Including VAT at 20%

In Scotland, a re-sanding job usually costs £3–£10 per m² including VAT. For a 50 m² drive, that is roughly £200–£500. Your exact price depends on what the survey or your photos show, and is fixed in writing before anything is booked.

ItemGuide price inc VAT
Re-sanding / re-jointing (standalone)£3–£10 per m²
Jet wash clean with a rotary cleaner£2.50–£5 per m²
Clean and re-sand£5–£10 per m²
Clean, re-sand and seal£8–£20 per m²
Sealing only£5–£15 per m²

Guide figures for Scotland, checked 9 November 2026.

Towns we cover in Edinburgh and the Lothians

We quote re-sanding in every town across Edinburgh and the Lothians, including:

What does a re-sanding job involve?

Re-sanding is refilling the joints between blocks with fine, dry jointing sand, usually kiln-dried, and working it down with a brush and a plate compactor fitted with a protective pad. The sand in the joints is what makes blocks lock together; when it washes or sweeps out, the blocks can move, rattle and let weeds in.

Frost and heavy rain test paving in Scotland, so a well-drained sub-base and full joints matter as much as the blocks.

  • Plate compactor with a rubber pad to settle the sand
  • Surface swept and dried
  • Second top-up and surplus swept off
  • Kiln-dried sand brushed into every joint

How we find the cause

  • Walls, doors and planting to protect
  • How much joint sand is left
  • Whether the paving is permeable (no sand, no sealing with the wrong product)
  • Which sealer finish suits a slope or patio
  • Whether any blocks are loose or sunken first

How it works

  1. Quick details

    Your postcode and the job. It takes a minute.

  2. On-site check

    Measurements, levels against the damp-proof course, ground and drainage.

  3. Itemised quote

    Fixed once the specification is agreed, with no vague extras.

  4. Laid and finished

    Compacted, jointed and handed back clean.

Re-sanding in Edinburgh and the Lothians: questions

How much does a re-sanding job cost in Edinburgh and the Lothians?

Guide price for Edinburgh and the Lothians: £3–£10 per m² including VAT, with a minimum charge for small areas.

Will cleaning damage my block paving?

Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.

How often should block paving in Edinburgh and the Lothians be cleaned?

Every two to four years for most drives, more often for shaded or north-facing paving.

Do you cover Livingston, Musselburgh and Bathgate?

Yes. We cover all of Edinburgh and the Lothians, including Livingston, Musselburgh and Bathgate.

Neighbouring areas

Next step

Get a guide price in two minutes

Answer four quick questions for an instant guide price, then book a free survey to fix it in writing. Repairs and cleaning can often be priced from photos.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote