Northern Ireland · Re-sanding

Re-sanding and re-jointing in County Armagh

Re-sanding and re-jointing in County Armagh: done properly, it lifts years of moss and grime and leaves the joints full and tight.

  • 3 towns listed
  • £3–£9.50 per m² inc VAT
  • Free survey for new paving
Broom brushing kiln-dried sand into the joints of charcoal block paving

How much does a re-sanding job cost in County Armagh?

Guide price in County Armagh£3–£9.50 per m²Including VAT at 20%

For County Armagh, our guide is £3–£9.50 per m² including VAT, so a 50 m² drive is likely to be £190–£480. Smaller jobs cost more per square metre because set-up and waste costs do not shrink with the area.

ItemGuide price inc VAT
Re-sanding / re-jointing (standalone)£3–£9.50 per m²
Jet wash clean with a rotary cleaner£2.50–£5 per m²
Clean and re-sand£5–£9.50 per m²
Clean, re-sand and seal£7.50–£19 per m²
Sealing only£5–£14 per m²

Guide figures for Northern Ireland, checked 9 November 2026.

Towns we cover in County Armagh

We quote re-sanding in every town across County Armagh, including:

What is included?

Joints empty naturally over time, and especially after pressure washing. Re-sanding on its own is a quick job on a clean, dry surface; on dirty paving it follows a clean.

Wet winters in Northern Ireland make falls, edge restraints and full joints especially important.

  • Plate compactor with a rubber pad to settle the sand
  • Surface swept and dried
  • Second top-up and surplus swept off
  • Kiln-dried sand brushed into every joint

How we find the cause

  • Moss, algae, weeds and oil staining
  • Walls, doors and planting to protect
  • Type of block and its age
  • How much joint sand is left
  • Which sealer finish suits a slope or patio

How it works

  1. Send the basics

    Postcode, what you need and a rough size. Photos help.

  2. Survey

    We measure, check levels, ground and drainage, and talk through blocks and patterns.

  3. Written quote

    An itemised quote with the specification, the price and the start date.

  4. The work

    Our paving team builds it to the agreed specification and leaves the site swept.

Re-sanding in County Armagh: questions

How often should block paving in County Armagh be cleaned?

Every two to four years for most drives, more often for shaded or north-facing paving.

Can you seal my drive straight after cleaning?

Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.

Will cleaning damage my block paving?

Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.

How much does a re-sanding job cost in County Armagh?

Guide price for County Armagh: £3–£9.50 per m² including VAT, with a minimum charge for small areas.

Neighbouring areas

Next step

Get a guide price in two minutes

Answer four quick questions for an instant guide price, then book a free survey to fix it in writing. Repairs and cleaning can often be priced from photos.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote