England · Re-sanding

Re-sanding and re-jointing in Buckinghamshire

We clean, re-sand and seal block paving across Buckinghamshire (HP5, HP6, HP7, HP8), using a rotary cleaner at a pressure that will not damage the blocks.

  • 8 towns listed
  • £3–£11 per m² inc VAT
  • Free survey for new paving
Broom brushing kiln-dried sand into the joints of charcoal block paving

How much does a re-sanding job cost in Buckinghamshire?

Guide price in Buckinghamshire£3–£11 per m²Including VAT at 20%

For Buckinghamshire, our guide is £3–£11 per m² including VAT, so a 50 m² drive is likely to be £215–£540. Smaller jobs cost more per square metre because set-up and waste costs do not shrink with the area.

ItemGuide price inc VAT
Re-sanding / re-jointing (standalone)£3–£11 per m²
Jet wash clean with a rotary cleaner£2.50–£5.50 per m²
Clean and re-sand£5.50–£11 per m²
Clean, re-sand and seal£8.50–£20 per m²
Sealing only£5.50–£16 per m²

Guide figures for the South East, checked 9 November 2026.

Towns we cover in Buckinghamshire

We quote re-sanding in every town across Buckinghamshire, including:

What is included?

Joints empty naturally over time, and especially after pressure washing. Re-sanding on its own is a quick job on a clean, dry surface; on dirty paving it follows a clean.

Planning-sensitive towns and conservation areas are common in the South East, so we check the front-garden rules before quoting.

  • Plate compactor with a rubber pad to settle the sand
  • Surface swept and dried
  • Kiln-dried sand brushed into every joint
  • Second top-up and surplus swept off

How we find the cause

  • Type of block and its age
  • Walls, doors and planting to protect
  • How much joint sand is left
  • Moss, algae, weeds and oil staining
  • Which sealer finish suits a slope or patio

How it works

  1. Quick details

    Your postcode and the job. It takes a minute.

  2. On-site check

    Measurements, levels against the damp-proof course, ground and drainage.

  3. Itemised quote

    Fixed once the specification is agreed, with no vague extras.

  4. Laid and finished

    Compacted, jointed and handed back clean.

Re-sanding in Buckinghamshire: questions

Do you cover Milton Keynes, High Wycombe and Aylesbury?

Yes. We cover all of Buckinghamshire, including Milton Keynes, High Wycombe and Aylesbury.

Can you seal my drive straight after cleaning?

Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.

How often should block paving in Buckinghamshire be cleaned?

Every two to four years for most drives, more often for shaded or north-facing paving.

Will cleaning damage my block paving?

Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.

Neighbouring areas

Next step

Get a guide price in two minutes

Answer four quick questions for an instant guide price, then book a free survey to fix it in writing. Repairs and cleaning can often be priced from photos.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote