Leicestershire · Lift and re-lay

Lift and re-lay block paving in Oadby

From the LE postcodes to Leicestershire, we put tired block paving right without breaking out the whole drive.

  • Postcodes LE2
  • £35–£80 per m² inc VAT
  • Free survey for new paving
Cleaned blocks stacked beside a screeded sand bed during a lift and re-lay

Lift and re-lay block paving in Oadby: what to expect

Around Oadby, plots are often larger and drives longer, so edging, falls and the route the water takes need planning.

Clay and mudstone ground is common in the East Midlands, so we allow for a deeper sub-base where the survey shows soft ground.

How much does a lift and re-lay job cost in Oadby?

Guide price in Oadby£35–£80 per m²Including VAT at 20%

Expect lift and re-lay jobs in Oadby to come in at around £35–£80 per m², including VAT at 20%. As an example, 30 m² re-laid usually comes to between £1,050 and £2,400.

ItemGuide price inc VAT
Lift and re-lay on a sound base£35–£80 per m²
Small repair (a few blocks or a short trench)£200–£650
Sunken or rutted patch repaired£300–£1,200
Lift and re-lay with sub-base rebuilt£60–£110 per m²

Guide figures for the East Midlands, checked 9 November 2026. See all prices or use the guide price tool.

What you get with our lift and re-lay service

Lift and re-lay means taking up an existing block paved area, cleaning and stacking the blocks, correcting the bed and the sub-base, and laying the same blocks back down. When the blocks are still sound, it fixes widespread sinking, rocking and uneven joints for less than a new drive, because the blocks themselves are re-used.

  • Sub-base repaired or rebuilt where needed
  • Lifting, cleaning and stacking
  • Jointing sand and compaction
  • New screeded laying course
  • Survey of the blocks: thickness, damage and whether they are worth re-using

How we find the cause

  • Condition and thickness of your existing blocks
  • Falls, so water does not collect again
  • Whether a drain or gully is leaking under the paving
  • What caused the dip or movement: base, laying course, edging or drains
  • Whether the edging has moved or was never set in concrete

How it works

  1. Send the basics

    Postcode, what you need and a rough size. Photos help.

  2. Survey

    We measure, check levels, ground and drainage, and talk through blocks and patterns.

  3. Written quote

    An itemised quote with the specification, the price and the start date.

  4. The work

    Our paving team builds it to the agreed specification and leaves the site swept.

Why choose Block Paving Contractors

Repair before replace

If your drive can be fixed or re-laid, we will say so.

Water planned first

Falls, channels and soakaways are designed before the pattern is chosen.

The dig and sub-base in writing

Your quote states the depth of dig, the sub-base thickness and how it is compacted.

Itemised quotes

Break-out, waste, edging, drainage and covers are separate lines you can see.

Lift and re-lay in Oadby: questions

Can you send someone just to look?

For larger or unclear problems we visit; for small repairs, clear photos with a tape measure in shot are often enough to price it.

Do you cover Wigston, Leicester and Loughborough?

Yes. We cover Oadby and the places around it, including Wigston, Leicester and Loughborough, and the rest of Leicestershire.

Can you repair block paving in Oadby without replacing it?

Usually, yes. We lift the affected blocks, fix the bed or base, and re-lay the same blocks so the repair matches.

How much does a lift and re-lay job cost in Oadby?

Our guide is £35–£80 per m² including VAT. Small repairs are often priced from photos.

Lift and re-lay near Oadby

Nearby towns we cover for lift and re-lay, and lift and re-lay across Leicestershire:

Other block paving services in Oadby

Or see all block paving services in Oadby.

Next step

Get a guide price in two minutes

Call, WhatsApp or use the form, and we will come back to you to arrange a visit or a price from photos.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote