Greater London · Lift and re-lay

Lift and re-lay block paving in Fulham

From the SW postcodes to Greater London, we put tired block paving right without breaking out the whole drive.

  • Postcodes SW6, SW10, SW5
  • £40–£95 per m² inc VAT
  • Free survey for new paving
Cleaned blocks stacked beside a screeded sand bed during a lift and re-lay

Lift and re-lay block paving in Fulham: what to expect

Fulham has everything from short terrace frontages to wide drives on newer estates, so the survey sets the layout and the dig.

Many London streets have controlled parking and narrow frontages, so we measure the car space and the crossover before anything else.

How much does a lift and re-lay job cost in Fulham?

Guide price in Fulham£40–£95 per m²Including VAT at 20%

For Fulham, our guide is £40–£95 per m² including VAT, so 30 m² re-laid is likely to be £1,250–£2,900. Smaller jobs cost more per square metre because set-up and waste costs do not shrink with the area.

ItemGuide price inc VAT
Lift and re-lay on a sound base£40–£95 per m²
Small repair (a few blocks or a short trench)£240–£780
Sunken or rutted patch repaired£360–£1,450
Lift and re-lay with sub-base rebuilt£70–£130 per m²

Guide figures for London, checked 9 November 2026. See all prices or use the guide price tool.

What you get with our lift and re-lay service

Lift and re-lay means taking up an existing block paved area, cleaning and stacking the blocks, correcting the bed and the sub-base, and laying the same blocks back down. When the blocks are still sound, it fixes widespread sinking, rocking and uneven joints for less than a new drive, because the blocks themselves are re-used.

  • Lifting, cleaning and stacking
  • Sub-base repaired or rebuilt where needed
  • New screeded laying course
  • Jointing sand and compaction
  • Blocks relaid, new cuts made, edges re-set

Before we price your lift and re-lay job

  • Replacement blocks or hidden blocks to swap in
  • Falls, so water does not collect again
  • How much of the area needs lifting to blend the repair
  • Whether the edging has moved or was never set in concrete
  • Whether a drain or gully is leaking under the paving

How it works

  1. Quick details

    Your postcode and the job. It takes a minute.

  2. On-site check

    Measurements, levels against the damp-proof course, ground and drainage.

  3. Itemised quote

    Fixed once the specification is agreed, with no vague extras.

  4. Laid and finished

    Compacted, jointed and handed back clean.

How we work

Water planned first

Falls, channels and soakaways are designed before the pattern is chosen.

Itemised quotes

Break-out, waste, edging, drainage and covers are separate lines you can see.

Clean finish

The site is swept, the joints are filled and you are shown how to look after the paving.

The dig and sub-base in writing

Your quote states the depth of dig, the sub-base thickness and how it is compacted.

Lift and re-lay in Fulham: questions

Can you send someone just to look?

For larger or unclear problems we visit; for small repairs, clear photos with a tape measure in shot are often enough to price it.

Why does block paving sink?

Most dips come from a thin or poorly compacted sub-base, too much sand under the blocks, failed edging, or water washing material out from a broken drain.

Do you cover Putney, Battersea and Shepherds Bush?

Yes. We cover Fulham and the places around it, including Putney, Battersea and Shepherds Bush, and the rest of Greater London.

How much does a lift and re-lay job cost in Fulham?

Our guide is £40–£95 per m² including VAT. Small repairs are often priced from photos.

Lift and re-lay near Fulham

Nearby towns we cover for lift and re-lay, and lift and re-lay across Greater London:

Other block paving services in Fulham

Or see all block paving services in Fulham.

Next step

Get a guide price in two minutes

Get a guide price in a couple of minutes with our quote tool, or book a survey in Fulham.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote