Essex · Lift and re-lay

Lift and re-lay block paving in Rayleigh

Before you replace a block drive in Rayleigh, ask whether it can be repaired: re-levelling and re-laying often cost far less than new paving.

  • Postcodes SS6, SS5
  • £35–£85 per m² inc VAT
  • Free survey for new paving
Cleaned blocks stacked beside a screeded sand bed during a lift and re-lay

Planning a lift and re-lay job in Rayleigh

Rayleigh is a sizeable town with a mix of semis, terraces and newer estates, and many drives here were first laid decades ago.

Flat ground across much of the East means falls have to be built in carefully so water does not sit on the drive.

How much does a lift and re-lay job cost in Rayleigh?

Guide price in Rayleigh£35–£85 per m²Including VAT at 20%

In the East of England, a lift and re-lay job usually costs £35–£85 per m² including VAT. For 30 m² re-laid, that is roughly £1,100–£2,500. Your exact price depends on what the survey or your photos show, and is fixed in writing before anything is booked.

ItemGuide price inc VAT
Lift and re-lay on a sound base£35–£85 per m²
Small repair (a few blocks or a short trench)£210–£680
Sunken or rutted patch repaired£320–£1,250
Lift and re-lay with sub-base rebuilt£65–£115 per m²

Guide figures for the East of England, checked 9 November 2026. See all prices or use the guide price tool.

What is included?

It is also the way to change a layout, add drainage or a recessed cover, or raise or lower a drive, without buying new blocks. A small allowance of new blocks is usually needed for breakages and new cuts.

  • Survey of the blocks: thickness, damage and whether they are worth re-using
  • Sub-base repaired or rebuilt where needed
  • Lifting, cleaning and stacking
  • Blocks relaid, new cuts made, edges re-set
  • Jointing sand and compaction

Before we price your lift and re-lay job

  • Whether the edging has moved or was never set in concrete
  • Condition and thickness of your existing blocks
  • Falls, so water does not collect again
  • Trees, roots and past trenches
  • How much of the area needs lifting to blend the repair

How it works

  1. Send the basics

    Postcode, what you need and a rough size. Photos help.

  2. Survey

    We measure, check levels, ground and drainage, and talk through blocks and patterns.

  3. Written quote

    An itemised quote with the specification, the price and the start date.

  4. The work

    Our paving team builds it to the agreed specification and leaves the site swept.

How we work

Edges set in concrete

Every edge restraint is bedded and haunched, so the paving cannot creep.

Honest timescales

We tell you how long the job takes and what can delay it, such as approvals and weather.

The dig and sub-base in writing

Your quote states the depth of dig, the sub-base thickness and how it is compacted.

Itemised quotes

Break-out, waste, edging, drainage and covers are separate lines you can see.

Lift and re-lay in Rayleigh: questions

Do you cover South Benfleet, Wickford and Pitsea?

Yes. We cover Rayleigh and the places around it, including South Benfleet, Wickford and Pitsea, and the rest of Essex.

Can you repair block paving in Rayleigh without replacing it?

Usually, yes. We lift the affected blocks, fix the bed or base, and re-lay the same blocks so the repair matches.

Why does block paving sink?

Most dips come from a thin or poorly compacted sub-base, too much sand under the blocks, failed edging, or water washing material out from a broken drain.

Can you send someone just to look?

For larger or unclear problems we visit; for small repairs, clear photos with a tape measure in shot are often enough to price it.

Lift and re-lay near Rayleigh

Nearby towns we cover for lift and re-lay, and lift and re-lay across Essex:

Other block paving services in Rayleigh

Or see all block paving services in Rayleigh.

Next step

Get a guide price in two minutes

Tell us what you have in mind for Rayleigh, and we will put a written price together.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote