Lift and re-lay block paving in Whitehaven: the local picture
Whitehaven is a smaller town, and many of its homes have more frontage to work with than city houses, which leaves room for borders and planting.
Terraced streets across the North West often have very short frontages, so we check parking depth before quoting a conversion.
How much does a lift and re-lay job cost in Whitehaven?
For Whitehaven, our guide is £35–£80 per m² including VAT, so 30 m² re-laid is likely to be £1,050–£2,400. Smaller jobs cost more per square metre because set-up and waste costs do not shrink with the area.
| Item | Guide price inc VAT |
|---|---|
| Lift and re-lay on a sound base | £35–£80 per m² |
| Small repair (a few blocks or a short trench) | £200–£650 |
| Sunken or rutted patch repaired | £300–£1,200 |
| Lift and re-lay with sub-base rebuilt | £60–£110 per m² |
Guide figures for the North West, checked 9 November 2026. See all prices or use the guide price tool.
What is included?
Lift and re-lay means taking up an existing block paved area, cleaning and stacking the blocks, correcting the bed and the sub-base, and laying the same blocks back down. When the blocks are still sound, it fixes widespread sinking, rocking and uneven joints for less than a new drive, because the blocks themselves are re-used.
- Sub-base repaired or rebuilt where needed
- Survey of the blocks: thickness, damage and whether they are worth re-using
- Lifting, cleaning and stacking
- Jointing sand and compaction
- Blocks relaid, new cuts made, edges re-set
Before we price your lift and re-lay job
- Condition and thickness of your existing blocks
- How much of the area needs lifting to blend the repair
- Whether the edging has moved or was never set in concrete
- Whether a drain or gully is leaking under the paving
- Replacement blocks or hidden blocks to swap in
From enquiry to finished paving
Quick details
Your postcode and the job. It takes a minute.
On-site check
Measurements, levels against the damp-proof course, ground and drainage.
Itemised quote
Fixed once the specification is agreed, with no vague extras.
Laid and finished
Compacted, jointed and handed back clean.
How we work
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Lift and re-lay in Whitehaven: questions
How much does a lift and re-lay job cost in Whitehaven?
Our guide is £35–£80 per m² including VAT. Small repairs are often priced from photos.
Can you repair block paving in Whitehaven without replacing it?
Usually, yes. We lift the affected blocks, fix the bed or base, and re-lay the same blocks so the repair matches.
Why does block paving sink?
Most dips come from a thin or poorly compacted sub-base, too much sand under the blocks, failed edging, or water washing material out from a broken drain.
Do you cover Workington, Barrow-in-Furness and Penrith?
Yes. We cover Whitehaven and the places around it, including Workington, Barrow-in-Furness and Penrith, and the rest of Cumbria.
Lift and re-lay near Whitehaven
Nearby towns we cover for lift and re-lay, and lift and re-lay across Cumbria:
