Block paving sealing in Brighouse: the local picture
In Brighouse, many front gardens have already been paved once, so new paving often starts with breaking out the old surface.
Sloping drives are common in parts of Yorkshire, which affects falls, steps and drainage at the bottom of the drive.
How much does a block paving sealing job cost in Brighouse?
Most block paving sealing job quotes in Yorkshire and the Humber fall within £4.50–£14 per m² including VAT. A 50 m² drive would usually be about £225–£680, with any extras listed separately on your quote.
| Item | Guide price inc VAT |
|---|---|
| Sealing only | £4.50–£14 per m² |
| Jet wash clean with a rotary cleaner | £2.50–£4.50 per m² |
| Clean and re-sand | £4.50–£9 per m² |
| Clean, re-sand and seal | £7–£18 per m² |
Guide figures for Yorkshire and the Humber, checked 9 November 2026. See all prices or use the guide price tool.
What is included?
Sealing only works on paving that has been cleaned and re-sanded first and is completely dry, so it is usually part of a clean, re-sand and seal package. It is not permanent: most sealers need renewing every three to seven years as they wear in the wheel tracks, and new paving should be left for a few months before sealing so moisture and any white efflorescence can clear.
- Edges, walls and doors protected
- Check that the paving is clean, re-sanded and dry
- Second coat where the product requires it
- Drying time and a date when cars can return
- Sealer applied evenly by roller or low-pressure sprayer
What we look at first in Brighouse
- Type of block and its age
- Shade and drainage, which affect regrowth
- Moss, algae, weeds and oil staining
- Whether any blocks are loose or sunken first
- Which sealer finish suits a slope or patio
What happens next
Quick details
Your postcode and the job. It takes a minute.
On-site check
Measurements, levels against the damp-proof course, ground and drainage.
Itemised quote
Fixed once the specification is agreed, with no vague extras.
Laid and finished
Compacted, jointed and handed back clean.
How we work
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
Sealing in Brighouse: questions
Can you seal my drive straight after cleaning?
Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.
How much does a block paving sealing job cost in Brighouse?
Guide price for Brighouse: £4.50–£14 per m² including VAT, with a minimum charge for small areas.
Will cleaning damage my block paving?
Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.
How often should block paving in Brighouse be cleaned?
Every two to four years for most drives, more often for shaded or north-facing paving.
Sealing near Brighouse
Nearby towns we cover for sealing, and sealing across West Yorkshire:
- Sealing in Halifax
- Sealing in Cleckheaton
- Sealing in Huddersfield
- Sealing in Bradford
- Sealing in Dewsbury
- Sealing in Morley
