Suffolk · Sealing

Block paving sealing in Haverhill

We clean, re-sand and seal block paving across Haverhill (CB9), using a rotary cleaner at a pressure that will not damage the blocks.

  • Postcodes CB9
  • £5.50–£16 per m² inc VAT
  • Free survey for new paving
Roller applying clear sealer to a brindle block paved drive, showing a satin sheen

Block paving sealing in Haverhill: what to expect

Homes in Haverhill include plenty of semis and detached houses with room for a drive, plus older terraces where parking is tighter.

Clay soils are common in parts of the East of England, so drainage and sub-base depth get extra attention.

How much does a block paving sealing job cost in Haverhill?

Guide price in Haverhill£5.50–£16 per m²Including VAT at 20%

Most block paving sealing job quotes in the East of England fall within £5.50–£16 per m² including VAT. A 50 m² drive would usually be about £265–£790, with any extras listed separately on your quote.

ItemGuide price inc VAT
Sealing only£5.50–£16 per m²
Jet wash clean with a rotary cleaner£2.50–£5.50 per m²
Clean and re-sand£5.50–£11 per m²
Clean, re-sand and seal£8.50–£20 per m²

Guide figures for the East of England, checked 9 November 2026. See all prices or use the guide price tool.

What you get with our sealing service

Sealing only works on paving that has been cleaned and re-sanded first and is completely dry, so it is usually part of a clean, re-sand and seal package. It is not permanent: most sealers need renewing every three to seven years as they wear in the wheel tracks, and new paving should be left for a few months before sealing so moisture and any white efflorescence can clear.

  • Sealer applied evenly by roller or low-pressure sprayer
  • Check that the paving is clean, re-sanded and dry
  • Second coat where the product requires it
  • Drying time and a date when cars can return
  • Edges, walls and doors protected

How we find the cause

  • Which sealer finish suits a slope or patio
  • Whether any blocks are loose or sunken first
  • Moss, algae, weeds and oil staining
  • How much joint sand is left
  • Type of block and its age

From enquiry to finished paving

  1. Quick details

    Your postcode and the job. It takes a minute.

  2. On-site check

    Measurements, levels against the damp-proof course, ground and drainage.

  3. Itemised quote

    Fixed once the specification is agreed, with no vague extras.

  4. Laid and finished

    Compacted, jointed and handed back clean.

How we work

Itemised quotes

Break-out, waste, edging, drainage and covers are separate lines you can see.

Clean finish

The site is swept, the joints are filled and you are shown how to look after the paving.

The dig and sub-base in writing

Your quote states the depth of dig, the sub-base thickness and how it is compacted.

Repair before replace

If your drive can be fixed or re-laid, we will say so.

Sealing in Haverhill: questions

Do you cover Sudbury, Bury St Edmunds and Stowmarket?

Yes. We cover Haverhill and the places around it, including Sudbury, Bury St Edmunds and Stowmarket, and the rest of Suffolk.

Can you seal my drive straight after cleaning?

Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.

Will cleaning damage my block paving?

Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.

How much does a block paving sealing job cost in Haverhill?

Guide price for Haverhill: £5.50–£16 per m² including VAT, with a minimum charge for small areas.

Sealing near Haverhill

Nearby towns we cover for sealing, and sealing across Suffolk:

Other block paving services in Haverhill

Or see all block paving services in Haverhill.

Next step

Get a guide price in two minutes

Tell us what you have in mind for Haverhill, and we will put a written price together.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote