Block paving sealing in Witney: what to expect
In Witney, many front gardens have already been paved once, so new paving often starts with breaking out the old surface.
Planning-sensitive towns and conservation areas are common in the South East, so we check the front-garden rules before quoting.
How much does a block paving sealing job cost in Witney?
Guide price in Witney: £5.50–£16 per m² including VAT, which puts a 50 m² drive at about £270–£810. These are South East guide figures; the survey confirms the real price before you commit.
| Item | Guide price inc VAT |
|---|---|
| Sealing only | £5.50–£16 per m² |
| Jet wash clean with a rotary cleaner | £2.50–£5.50 per m² |
| Clean and re-sand | £5.50–£11 per m² |
| Clean, re-sand and seal | £8.50–£20 per m² |
Guide figures for the South East, checked 9 November 2026. See all prices or use the guide price tool.
What you get with our sealing service
Sealing only works on paving that has been cleaned and re-sanded first and is completely dry, so it is usually part of a clean, re-sand and seal package. It is not permanent: most sealers need renewing every three to seven years as they wear in the wheel tracks, and new paving should be left for a few months before sealing so moisture and any white efflorescence can clear.
- Check that the paving is clean, re-sanded and dry
- Second coat where the product requires it
- Drying time and a date when cars can return
- Sealer applied evenly by roller or low-pressure sprayer
- Edges, walls and doors protected
What we look at first in Witney
- Which sealer finish suits a slope or patio
- Whether any blocks are loose or sunken first
- Type of block and its age
- Whether the paving is permeable (no sand, no sealing with the wrong product)
- Walls, doors and planting to protect
From enquiry to finished paving
Tell us about the job
Use the form, the quote tool, WhatsApp or a call.
We take a look
A survey visit, or photos for smaller repair and cleaning jobs.
Price in writing
Every line itemised, including the dig, edging and drainage.
Booked and built
Agreed start date, then the work, the final clean-down and the joint top-up.
Why choose Block Paving Contractors
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
Repair before replace
If your drive can be fixed or re-laid, we will say so.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Sealing in Witney: questions
Can you seal my drive straight after cleaning?
Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.
Do you cover Oxford, Abingdon and Didcot?
Yes. We cover Witney and the places around it, including Oxford, Abingdon and Didcot, and the rest of Oxfordshire.
How much does a block paving sealing job cost in Witney?
Guide price for Witney: £5.50–£16 per m² including VAT, with a minimum charge for small areas.
Will cleaning damage my block paving?
Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.
Sealing near Witney
Nearby towns we cover for sealing, and sealing across Oxfordshire:
