Block paving sealing in Selby: what to expect
Selby is a smaller town, and many of its homes have more frontage to work with than city houses, which leaves room for borders and planting.
Sloping drives are common in parts of Yorkshire, which affects falls, steps and drainage at the bottom of the drive.
How much does a block paving sealing job cost in Selby?
Most block paving sealing job quotes in Yorkshire and the Humber fall within £4.50–£14 per m² including VAT. A 50 m² drive would usually be about £225–£680, with any extras listed separately on your quote.
| Item | Guide price inc VAT |
|---|---|
| Sealing only | £4.50–£14 per m² |
| Jet wash clean with a rotary cleaner | £2.50–£4.50 per m² |
| Clean and re-sand | £4.50–£9 per m² |
| Clean, re-sand and seal | £7–£18 per m² |
Guide figures for Yorkshire and the Humber, checked 9 November 2026. See all prices or use the guide price tool.
What you get with our sealing service
Sealing only works on paving that has been cleaned and re-sanded first and is completely dry, so it is usually part of a clean, re-sand and seal package. It is not permanent: most sealers need renewing every three to seven years as they wear in the wheel tracks, and new paving should be left for a few months before sealing so moisture and any white efflorescence can clear.
- Drying time and a date when cars can return
- Edges, walls and doors protected
- Second coat where the product requires it
- Sealer applied evenly by roller or low-pressure sprayer
- Check that the paving is clean, re-sanded and dry
How we find the cause
- Moss, algae, weeds and oil staining
- How much joint sand is left
- Whether any blocks are loose or sunken first
- Which sealer finish suits a slope or patio
- Walls, doors and planting to protect
How it works
Send the basics
Postcode, what you need and a rough size. Photos help.
Survey
We measure, check levels, ground and drainage, and talk through blocks and patterns.
Written quote
An itemised quote with the specification, the price and the start date.
The work
Our paving team builds it to the agreed specification and leaves the site swept.
What you can expect from us
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
Repair before replace
If your drive can be fixed or re-laid, we will say so.
Sealing in Selby: questions
Do you cover York, Harrogate and Goole?
Yes. We cover Selby and the places around it, including York, Harrogate and Goole, and the rest of North Yorkshire.
Can you seal my drive straight after cleaning?
Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.
How much does a block paving sealing job cost in Selby?
Guide price for Selby: £4.50–£14 per m² including VAT, with a minimum charge for small areas.
How often should block paving in Selby be cleaned?
Every two to four years for most drives, more often for shaded or north-facing paving.
Sealing near Selby
Nearby towns we cover for sealing, and sealing across North Yorkshire:
