Block paving sealing in Redcar: what to expect
Homes in Redcar include plenty of semis and detached houses with room for a drive, plus older terraces where parking is tighter.
Former colliery ground and clay soils occur across the North East, so the survey checks for soft spots before the sub-base depth is set.
How much does a block paving sealing job cost in Redcar?
For Redcar, our guide is £4.50–£14 per m² including VAT, so a 50 m² drive is likely to be £225–£680. Smaller jobs cost more per square metre because set-up and waste costs do not shrink with the area.
| Item | Guide price inc VAT |
|---|---|
| Sealing only | £4.50–£14 per m² |
| Jet wash clean with a rotary cleaner | £2.50–£4.50 per m² |
| Clean and re-sand | £4.50–£9 per m² |
| Clean, re-sand and seal | £7–£18 per m² |
Guide figures for the North East, checked 9 November 2026. See all prices or use the guide price tool.
What does a block paving sealing job involve?
Sealing only works on paving that has been cleaned and re-sanded first and is completely dry, so it is usually part of a clean, re-sand and seal package. It is not permanent: most sealers need renewing every three to seven years as they wear in the wheel tracks, and new paving should be left for a few months before sealing so moisture and any white efflorescence can clear.
- Drying time and a date when cars can return
- Second coat where the product requires it
- Edges, walls and doors protected
- Check that the paving is clean, re-sanded and dry
- Sealer applied evenly by roller or low-pressure sprayer
Before we price your block paving sealing job
- Type of block and its age
- Shade and drainage, which affect regrowth
- Walls, doors and planting to protect
- Moss, algae, weeds and oil staining
- Which sealer finish suits a slope or patio
What happens next
Send the basics
Postcode, what you need and a rough size. Photos help.
Survey
We measure, check levels, ground and drainage, and talk through blocks and patterns.
Written quote
An itemised quote with the specification, the price and the start date.
The work
Our paving team builds it to the agreed specification and leaves the site swept.
What you can expect from us
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
Sealing in Redcar: questions
Will cleaning damage my block paving?
Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.
Can you seal my drive straight after cleaning?
Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.
How much does a block paving sealing job cost in Redcar?
Guide price for Redcar: £4.50–£14 per m² including VAT, with a minimum charge for small areas.
How often should block paving in Redcar be cleaned?
Every two to four years for most drives, more often for shaded or north-facing paving.
Sealing near Redcar
Nearby towns we cover for sealing, and sealing across North Yorkshire:
- Sealing in Middlesbrough
- Sealing in Thornaby-on-Tees
- Sealing in Hartlepool
- Sealing in Billingham
- Sealing in Stockton-on-Tees
