Lincolnshire · Sealing

Block paving sealing in Scunthorpe

Block paving sealing in Scunthorpe: done properly, it lifts years of moss and grime and leaves the joints full and tight.

  • Postcodes DN16, DN17, DN15
  • £4.50–£14 per m² inc VAT
  • Free survey for new paving
Roller applying clear sealer to a brindle block paved drive, showing a satin sheen

Planning a block paving sealing job in Scunthorpe

Scunthorpe has a big mix of housing, from older terraces near the centre to newer estates further out, so no two drives here start from the same ground.

Sloping drives are common in parts of Yorkshire, which affects falls, steps and drainage at the bottom of the drive.

How much does a block paving sealing job cost in Scunthorpe?

Guide price in Scunthorpe£4.50–£14 per m²Including VAT at 20%

Most block paving sealing job quotes in Yorkshire and the Humber fall within £4.50–£14 per m² including VAT. A 50 m² drive would usually be about £225–£680, with any extras listed separately on your quote.

ItemGuide price inc VAT
Sealing only£4.50–£14 per m²
Jet wash clean with a rotary cleaner£2.50–£4.50 per m²
Clean and re-sand£4.50–£9 per m²
Clean, re-sand and seal£7–£18 per m²

Guide figures for Yorkshire and the Humber, checked 9 November 2026. See all prices or use the guide price tool.

What does a block paving sealing job involve?

Sealing block paving means applying a clear liquid sealer to clean, dry paving. A good sealer soaks into the blocks and the jointing sand, binding the sand so it does not wash out, reducing staining and making the surface easier to keep clean. Some sealers also deepen the colour or leave a light sheen.

  • Drying time and a date when cars can return
  • Sealer applied evenly by roller or low-pressure sprayer
  • Second coat where the product requires it
  • Check that the paving is clean, re-sanded and dry
  • Edges, walls and doors protected

What we look at first in Scunthorpe

  • Which sealer finish suits a slope or patio
  • Moss, algae, weeds and oil staining
  • Type of block and its age
  • Whether the paving is permeable (no sand, no sealing with the wrong product)
  • Shade and drainage, which affect regrowth

From enquiry to finished paving

  1. Quick details

    Your postcode and the job. It takes a minute.

  2. On-site check

    Measurements, levels against the damp-proof course, ground and drainage.

  3. Itemised quote

    Fixed once the specification is agreed, with no vague extras.

  4. Laid and finished

    Compacted, jointed and handed back clean.

How we work

Edges set in concrete

Every edge restraint is bedded and haunched, so the paving cannot creep.

Itemised quotes

Break-out, waste, edging, drainage and covers are separate lines you can see.

Repair before replace

If your drive can be fixed or re-laid, we will say so.

Water planned first

Falls, channels and soakaways are designed before the pattern is chosen.

Sealing in Scunthorpe: questions

Will cleaning damage my block paving?

Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.

Can you seal my drive straight after cleaning?

Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.

Do you cover Gainsborough, Grimsby and Lincoln?

Yes. We cover Scunthorpe and the places around it, including Gainsborough, Grimsby and Lincoln, and the rest of Lincolnshire.

How much does a block paving sealing job cost in Scunthorpe?

Guide price for Scunthorpe: £4.50–£14 per m² including VAT, with a minimum charge for small areas.

Sealing near Scunthorpe

Nearby towns we cover for sealing, and sealing across Lincolnshire:

Other block paving services in Scunthorpe

Or see all block paving services in Scunthorpe.

Next step

Get a guide price in two minutes

Want a number before a visit? Try the guide price tool, then book a survey to fix it.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote