Block paving sealing in Lancaster: the local picture
In Lancaster, many front gardens have already been paved once, so new paving often starts with breaking out the old surface.
Terraced streets across the North West often have very short frontages, so we check parking depth before quoting a conversion.
How much does a block paving sealing job cost in Lancaster?
In the North West, a block paving sealing job usually costs £5–£15 per m² including VAT. For a 50 m² drive, that is roughly £250–£750. Your exact price depends on what the survey or your photos show, and is fixed in writing before anything is booked.
| Item | Guide price inc VAT |
|---|---|
| Sealing only | £5–£15 per m² |
| Jet wash clean with a rotary cleaner | £2.50–£5 per m² |
| Clean and re-sand | £5–£10 per m² |
| Clean, re-sand and seal | £8–£20 per m² |
Guide figures for the North West, checked 9 November 2026. See all prices or use the guide price tool.
What does a block paving sealing job involve?
Sealing only works on paving that has been cleaned and re-sanded first and is completely dry, so it is usually part of a clean, re-sand and seal package. It is not permanent: most sealers need renewing every three to seven years as they wear in the wheel tracks, and new paving should be left for a few months before sealing so moisture and any white efflorescence can clear.
- Check that the paving is clean, re-sanded and dry
- Second coat where the product requires it
- Sealer applied evenly by roller or low-pressure sprayer
- Drying time and a date when cars can return
- Edges, walls and doors protected
What we look at first in Lancaster
- Which sealer finish suits a slope or patio
- Whether the paving is permeable (no sand, no sealing with the wrong product)
- Type of block and its age
- Whether any blocks are loose or sunken first
- Walls, doors and planting to protect
From enquiry to finished paving
Quick details
Your postcode and the job. It takes a minute.
On-site check
Measurements, levels against the damp-proof course, ground and drainage.
Itemised quote
Fixed once the specification is agreed, with no vague extras.
Laid and finished
Compacted, jointed and handed back clean.
What you can expect from us
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Repair before replace
If your drive can be fixed or re-laid, we will say so.
Sealing in Lancaster: questions
Do you cover Morecambe, Fleetwood and Thornton-Cleveleys?
Yes. We cover Lancaster and the places around it, including Morecambe, Fleetwood and Thornton-Cleveleys, and the rest of Lancashire.
Will cleaning damage my block paving?
Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.
Can you seal my drive straight after cleaning?
Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.
How often should block paving in Lancaster be cleaned?
Every two to four years for most drives, more often for shaded or north-facing paving.
Sealing near Lancaster
Nearby towns we cover for sealing, and sealing across Lancashire:
- Sealing in Morecambe
- Sealing in Fleetwood
- Sealing in Thornton-Cleveleys
- Sealing in Blackpool
- Sealing in Preston
- Sealing in Lytham St Annes
