Planning a block paving sealing job in Fareham
Homes in Fareham include plenty of semis and detached houses with room for a drive, plus older terraces where parking is tighter.
Chalk, clay and sandy ground all occur across the South East, so the dig and sub-base depth are set on the survey rather than assumed.
How much does a block paving sealing job cost in Fareham?
Expect block paving sealing jobs in Fareham to come in at around £5.50–£16 per m², including VAT at 20%. As an example, a 50 m² drive usually comes to between £270 and £810.
| Item | Guide price inc VAT |
|---|---|
| Sealing only | £5.50–£16 per m² |
| Jet wash clean with a rotary cleaner | £2.50–£5.50 per m² |
| Clean and re-sand | £5.50–£11 per m² |
| Clean, re-sand and seal | £8.50–£20 per m² |
Guide figures for the South East, checked 9 November 2026. See all prices or use the guide price tool.
What does a block paving sealing job involve?
Sealing only works on paving that has been cleaned and re-sanded first and is completely dry, so it is usually part of a clean, re-sand and seal package. It is not permanent: most sealers need renewing every three to seven years as they wear in the wheel tracks, and new paving should be left for a few months before sealing so moisture and any white efflorescence can clear.
- Second coat where the product requires it
- Sealer applied evenly by roller or low-pressure sprayer
- Edges, walls and doors protected
- Drying time and a date when cars can return
- Check that the paving is clean, re-sanded and dry
What we look at first in Fareham
- Walls, doors and planting to protect
- Which sealer finish suits a slope or patio
- Moss, algae, weeds and oil staining
- How much joint sand is left
- Whether the paving is permeable (no sand, no sealing with the wrong product)
From enquiry to finished paving
Quick details
Your postcode and the job. It takes a minute.
On-site check
Measurements, levels against the damp-proof course, ground and drainage.
Itemised quote
Fixed once the specification is agreed, with no vague extras.
Laid and finished
Compacted, jointed and handed back clean.
Why choose Block Paving Contractors
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Sealing in Fareham: questions
How much does a block paving sealing job cost in Fareham?
Guide price for Fareham: £5.50–£16 per m² including VAT, with a minimum charge for small areas.
Will cleaning damage my block paving?
Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.
Can you seal my drive straight after cleaning?
Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.
How often should block paving in Fareham be cleaned?
Every two to four years for most drives, more often for shaded or north-facing paving.
Sealing near Fareham
Nearby towns we cover for sealing, and sealing across Hampshire:
- Sealing in Gosport
- Sealing in Portsmouth
- Sealing in Waterlooville
- Sealing in Havant
- Sealing in Hythe
- Sealing in Southampton
