Block paving sealing in Stalybridge: the local picture
In Stalybridge, many front gardens have already been paved once, so new paving often starts with breaking out the old surface.
The North West is one of the wetter parts of England, so falls, channel drains and permeable options matter more than usual.
How much does a block paving sealing job cost in Stalybridge?
Guide price in Stalybridge: £5–£15 per m² including VAT, which puts a 50 m² drive at about £250–£750. These are North West guide figures; the survey confirms the real price before you commit.
| Item | Guide price inc VAT |
|---|---|
| Sealing only | £5–£15 per m² |
| Jet wash clean with a rotary cleaner | £2.50–£5 per m² |
| Clean and re-sand | £5–£10 per m² |
| Clean, re-sand and seal | £8–£20 per m² |
Guide figures for the North West, checked 9 November 2026. See all prices or use the guide price tool.
What is included?
Sealing only works on paving that has been cleaned and re-sanded first and is completely dry, so it is usually part of a clean, re-sand and seal package. It is not permanent: most sealers need renewing every three to seven years as they wear in the wheel tracks, and new paving should be left for a few months before sealing so moisture and any white efflorescence can clear.
- Second coat where the product requires it
- Sealer applied evenly by roller or low-pressure sprayer
- Edges, walls and doors protected
- Check that the paving is clean, re-sanded and dry
- Drying time and a date when cars can return
How we find the cause
- Walls, doors and planting to protect
- Moss, algae, weeds and oil staining
- Which sealer finish suits a slope or patio
- Whether the paving is permeable (no sand, no sealing with the wrong product)
- Type of block and its age
How it works
Tell us about the job
Use the form, the quote tool, WhatsApp or a call.
We take a look
A survey visit, or photos for smaller repair and cleaning jobs.
Price in writing
Every line itemised, including the dig, edging and drainage.
Booked and built
Agreed start date, then the work, the final clean-down and the joint top-up.
How we work
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
Repair before replace
If your drive can be fixed or re-laid, we will say so.
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Sealing in Stalybridge: questions
How often should block paving in Stalybridge be cleaned?
Every two to four years for most drives, more often for shaded or north-facing paving.
Will cleaning damage my block paving?
Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.
Do you cover Ashton-under-Lyne, Hyde and Denton?
Yes. We cover Stalybridge and the places around it, including Ashton-under-Lyne, Hyde and Denton, and the rest of Greater Manchester.
How much does a block paving sealing job cost in Stalybridge?
Guide price for Stalybridge: £5–£15 per m² including VAT, with a minimum charge for small areas.
Sealing near Stalybridge
Nearby towns we cover for sealing, and sealing across Greater Manchester:
- Sealing in Ashton-under-Lyne
- Sealing in Hyde
- Sealing in Denton
- Sealing in Droylsden
- Sealing in Oldham
- Sealing in Failsworth
