Block paving sealing in Mitcham: the local picture
Across Mitcham, front gardens range from narrow terrace plots to broad modern drives, and the best block, pattern and drainage choice changes with them.
Front gardens in much of London are short, so parking depth and the dropped kerb usually decide whether a drive is possible.
How much does a block paving sealing job cost in Mitcham?
Guide price in Mitcham: £6–£18 per m² including VAT, which puts a 50 m² drive at about £300–£900. These are London guide figures; the survey confirms the real price before you commit.
| Item | Guide price inc VAT |
|---|---|
| Sealing only | £6–£18 per m² |
| Jet wash clean with a rotary cleaner | £3–£6 per m² |
| Clean and re-sand | £6–£12 per m² |
| Clean, re-sand and seal | £9.50–£25 per m² |
Guide figures for London, checked 9 November 2026. See all prices or use the guide price tool.
What you get with our sealing service
Sealing only works on paving that has been cleaned and re-sanded first and is completely dry, so it is usually part of a clean, re-sand and seal package. It is not permanent: most sealers need renewing every three to seven years as they wear in the wheel tracks, and new paving should be left for a few months before sealing so moisture and any white efflorescence can clear.
- Check that the paving is clean, re-sanded and dry
- Drying time and a date when cars can return
- Sealer applied evenly by roller or low-pressure sprayer
- Edges, walls and doors protected
- Second coat where the product requires it
How we find the cause
- How much joint sand is left
- Shade and drainage, which affect regrowth
- Type of block and its age
- Whether any blocks are loose or sunken first
- Whether the paving is permeable (no sand, no sealing with the wrong product)
From enquiry to finished paving
Quick details
Your postcode and the job. It takes a minute.
On-site check
Measurements, levels against the damp-proof course, ground and drainage.
Itemised quote
Fixed once the specification is agreed, with no vague extras.
Laid and finished
Compacted, jointed and handed back clean.
How we work
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
Sealing in Mitcham: questions
Do you cover Morden, Wimbledon and Streatham?
Yes. We cover Mitcham and the places around it, including Morden, Wimbledon and Streatham, and the rest of Greater London.
Will cleaning damage my block paving?
Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.
How much does a block paving sealing job cost in Mitcham?
Guide price for Mitcham: £6–£18 per m² including VAT, with a minimum charge for small areas.
Can you seal my drive straight after cleaning?
Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.
Sealing near Mitcham
Nearby towns we cover for sealing, and sealing across Greater London:
- Sealing in Morden
- Sealing in Wimbledon
- Sealing in Streatham
- Sealing in Carshalton
- Sealing in Croydon
- Sealing in Sutton
