Planning a block paving sealing job in Enfield
Enfield has everything from short terrace frontages to wide drives on newer estates, so the survey sets the layout and the dig.
Front gardens in much of London are short, so parking depth and the dropped kerb usually decide whether a drive is possible.
How much does a block paving sealing job cost in Enfield?
Guide price in Enfield: £6–£18 per m² including VAT, which puts a 50 m² drive at about £300–£900. These are London guide figures; the survey confirms the real price before you commit.
| Item | Guide price inc VAT |
|---|---|
| Sealing only | £6–£18 per m² |
| Jet wash clean with a rotary cleaner | £3–£6 per m² |
| Clean and re-sand | £6–£12 per m² |
| Clean, re-sand and seal | £9.50–£25 per m² |
Guide figures for London, checked 9 November 2026. See all prices or use the guide price tool.
What does a block paving sealing job involve?
Sealing only works on paving that has been cleaned and re-sanded first and is completely dry, so it is usually part of a clean, re-sand and seal package. It is not permanent: most sealers need renewing every three to seven years as they wear in the wheel tracks, and new paving should be left for a few months before sealing so moisture and any white efflorescence can clear.
- Drying time and a date when cars can return
- Check that the paving is clean, re-sanded and dry
- Sealer applied evenly by roller or low-pressure sprayer
- Second coat where the product requires it
- Edges, walls and doors protected
How we find the cause
- Whether the paving is permeable (no sand, no sealing with the wrong product)
- Whether any blocks are loose or sunken first
- Walls, doors and planting to protect
- Type of block and its age
- Shade and drainage, which affect regrowth
How it works
Tell us about the job
Use the form, the quote tool, WhatsApp or a call.
We take a look
A survey visit, or photos for smaller repair and cleaning jobs.
Price in writing
Every line itemised, including the dig, edging and drainage.
Booked and built
Agreed start date, then the work, the final clean-down and the joint top-up.
What you can expect from us
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Sealing in Enfield: questions
How much does a block paving sealing job cost in Enfield?
Guide price for Enfield: £6–£18 per m² including VAT, with a minimum charge for small areas.
Will cleaning damage my block paving?
Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.
How often should block paving in Enfield be cleaned?
Every two to four years for most drives, more often for shaded or north-facing paving.
Can you seal my drive straight after cleaning?
Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.
Sealing near Enfield
Nearby towns we cover for sealing, and sealing across Greater London:
- Sealing in Edmonton
- Sealing in Tottenham
- Sealing in Chingford
- Sealing in Barnet
- Sealing in Walthamstow
- Sealing in Stamford Hill
