Gloucestershire · Sealing

Block paving sealing in Gloucester

Green, weedy or faded block paving in Gloucester? Our block paving sealing service brings it back without blasting the joints out, then puts the sand back.

  • Postcodes GL1, GL2, GL4
  • £5–£15 per m² inc VAT
  • Free survey for new paving
Roller applying clear sealer to a brindle block paved drive, showing a satin sheen

Block paving sealing in Gloucester: the local picture

Across Gloucester, front gardens range from narrow terrace plots to broad modern drives, and the best block, pattern and drainage choice changes with them.

The South West is wetter than the east of England, so falls and drainage are planned before the pattern is chosen.

How much does a block paving sealing job cost in Gloucester?

Guide price in Gloucester£5–£15 per m²Including VAT at 20%

Most block paving sealing job quotes in the South West fall within £5–£15 per m² including VAT. A 50 m² drive would usually be about £250–£750, with any extras listed separately on your quote.

ItemGuide price inc VAT
Sealing only£5–£15 per m²
Jet wash clean with a rotary cleaner£2.50–£5 per m²
Clean and re-sand£5–£10 per m²
Clean, re-sand and seal£8–£20 per m²

Guide figures for the South West, checked 9 November 2026. See all prices or use the guide price tool.

What you get with our sealing service

Sealing only works on paving that has been cleaned and re-sanded first and is completely dry, so it is usually part of a clean, re-sand and seal package. It is not permanent: most sealers need renewing every three to seven years as they wear in the wheel tracks, and new paving should be left for a few months before sealing so moisture and any white efflorescence can clear.

  • Drying time and a date when cars can return
  • Second coat where the product requires it
  • Edges, walls and doors protected
  • Check that the paving is clean, re-sanded and dry
  • Sealer applied evenly by roller or low-pressure sprayer

Before we price your block paving sealing job

  • Walls, doors and planting to protect
  • How much joint sand is left
  • Type of block and its age
  • Which sealer finish suits a slope or patio
  • Moss, algae, weeds and oil staining

What happens next

  1. Quick details

    Your postcode and the job. It takes a minute.

  2. On-site check

    Measurements, levels against the damp-proof course, ground and drainage.

  3. Itemised quote

    Fixed once the specification is agreed, with no vague extras.

  4. Laid and finished

    Compacted, jointed and handed back clean.

What you can expect from us

Itemised quotes

Break-out, waste, edging, drainage and covers are separate lines you can see.

Water planned first

Falls, channels and soakaways are designed before the pattern is chosen.

The dig and sub-base in writing

Your quote states the depth of dig, the sub-base thickness and how it is compacted.

Edges set in concrete

Every edge restraint is bedded and haunched, so the paving cannot creep.

Sealing in Gloucester: questions

How much does a block paving sealing job cost in Gloucester?

Guide price for Gloucester: £5–£15 per m² including VAT, with a minimum charge for small areas.

Can you seal my drive straight after cleaning?

Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.

Will cleaning damage my block paving?

Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.

How often should block paving in Gloucester be cleaned?

Every two to four years for most drives, more often for shaded or north-facing paving.

Sealing near Gloucester

Nearby towns we cover for sealing, and sealing across Gloucestershire:

Other block paving services in Gloucester

Or see all block paving services in Gloucester.

Next step

Get a guide price in two minutes

Tell us what you have in mind for Gloucester, and we will put a written price together.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote